Integrated Board

X10DSC+

Available Colors :

Key Features
  1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC DDR4 2133MHz; 24x DIMM slots
  3. 2 PCI-E 3.0 x16, 1 PCI-E 3.0 x8
  4. SIOM for flexible networking options
  5. 48x 2.5" Hot-swap SAS3/SATA3 drive bays
  6. LSI 3008 SAS3 IT mode controller
  7. Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
  8. 5x 8cm hot-swap redundant PWM fans
  9. 1600W Redundant Power Supplies Titanium Level (96%)

80 PLUS

Product SKUs
SSG-2028R-E1CR48L
  • SuperServer 2028R-E1CR48L (Black)
 
Motherboard

Super X10DSC+
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 
System Memory
Memory Capacity
  • 24x 288-pin DDR4 DIMM slots
  • Up to 1.5TB ECC LRDIMM, 768GB ECC RDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
 
On-Board Devices
Chipset
  • Intel® C612 chipset
SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
SAS3
  • LSI 3008 SAS3 IT mode
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • SIOM support for flexible networking options
Video
  • ASPEED AST2400 BMC
 
Input / Output
LAN
  • LAN ports via SIOM Add-On-Card:
    (See SIOM Compatibility Matrix)
USB
  • 3x USB 3.0 ports (2 rear + 1 Type A)
Video
  • 1x VGA port
Serial Port / Header
  • 1x Fast UART 16550 port / 1 Header
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-226STS-R1K62P1
 
Dimensions
Width
  • 17.2" (437mm)
Height
  • 3.5" (89mm)
Depth
  • 30" (684mm)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power status LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Power fail LED
 
Expansion Slots
PCI-Express
  • 2x PCI-E 3.0 x16 slots
  • 1x PCI-E 3.0 x8 slots
  • Slot 1 Occupied by LSI 3008 AOC
 
Drive Bays
Hot-swap
  • 48x 2.5" Hot-swap SAS3/SATA3 drive bays
  • 2x 2.5" rear Hot-swap drive bays
 
Backplane
Two 24 port SAS3 12G expander backplanes, each supporting up to 24x 2.5" SAS3 drives
 
System Cooling
Fans
  • 5x 8cm hot-swap redundant PWM cooling fans
 
Power Supply
1600W Redundant Titanium Level AC Power Supplies with PMbus
Input
  • 100-127 V, 50-60 Hz
  • 200-240 V, 50-60 Hz
+12V
  • Max: 83.3A & Min: 0A (100Vac-127Vac)
  • Max: 133A & Min: 0A (200Vac-240Vac)
12V SB
  • Max: 2.1A
  • Min: 0A
Certification Titanium Level96%    Titanium Level
   (Cert. in progress)

 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
Parts List - (Items Included)
 
Part Number
Qty
Description
Motherboard / Chassis MBD-X10DSC+
CSE-226STS-R1K62P1
1
1
Super X10DSC+ Motherboard
2U Chassis
Backplane BPN-SAS3-226SEL1-N4 2 2U 24-Port Expander Backplane Support 20x2.5\" SAS3/SATA3 HDD/SSD and 4x2.5\" SAS3/SATA3/NVMe Storage Devices
Cable 1 CBL-SAST-0844 2 SLIMLINE SAS to MiniSAS HD,INT,85CM,30D-41F-14D,32AWG
Cable 2 CBL-SAST-0836 2 MINI SAS HD,INT,SAS3 SSD,48CM,32AWG
Heatsink / Retention SNK-P0047PS 2 1U Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB
Parts MCP-220-82609-0N 1 Rear 2.5 x 2 Hot swap HDD kit for 216B/826B/417B/846X/847B
Power Supply PWS-1K62A-1R 2 AC-DC 1600W, Titanium Level, Redundancy, 1U, DC Output: +12V and +12Vs, 203 x 73.5 x 40 mm, AC Input: 90 - 264 VAC/47-63Hz, PMBus 1.2 with DSP controller,HF,RoHS/REACH
Drive Tray(s) MCP-220-00047-0B 48 Black 3rd Gen hot-swap 2.5" HDD tray
Add On Card AOC-S3008L-L8E-O-P 1 12Gbps SAS3/HBA/ 2 internal HD connectors/STD Gen3 PCI/122 HD support
Optional Parts List
  Part Number Qty Description
Onsite Service Program OS4HR3/2/1 - 3/2/1-year onsite 24x7x4 service
Onsite Service Program OSNBD3/2/1 - 3/2/1-year onsite NBD service
Software SFT-OOB-LIC 1 OOB Management Package (per node license)
Software SFT-DCMS-Single 1 DataCenter Management Package (per node license)
SIOM Network Card(s) AOC-MGP-I2
AOC-MGP-I4
AOC-MTGN-I2S
AOC-MTG-I4S
-
-
-
-
SIOM 2-port GbE, Intel i350-AM2
SIOM 4-port GbE, Intel i350-AM4
SIOM 2-port 10G SFP+, Intel 82599ES
SIOM 4-port 10G SFP+, Intel XL710