Available Colors :

Key Features
  • Compute Intensive Application
  • HPC, Data Center, Enterprise Server
  • Hyperscale / Hyperconverged
  • Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
  1. 1. Dual socket P (LGA 3647) supports Intel® Xeon® Scalable Processors, Dual UPI up to 10.4GT/s
  2. 2. Up to 3TB ECC 3DS L/RDIMM, up to DDR4-2666MHz; 24 DIMM slots
  3. 3. 2 PCI-E 3.0 x8 slot, 1 PCI-E 3.0 x16, 1 SIOMcard support (flexible networking) Note: must bundle with Network card
  4. 4. 6 SAS3 or 3 NVMe + 3 SAS3 Hot-swap 3.5" drive bays, 2 internal M.2 NVMe/SATA slots
  5. 5. SAS3 support via Broadcom 3008; IT mode
  6. 6. IPMI 2.0 + KVM with dedicated LAN
  7. 7. Video via Aspeed AST2500 BMC
  8. 8. 4 Heavy duty 8cm PWM fans with air shroud
  9. 9. 2200W Redundant Power Supplies Titanium Level (96%)

Product SKUs
SYS-6029BT-DNC0R
  • SuperServer 6029BT-DNC0R (Black)
 
Motherboard

Super X11DPT-B
 
Processor/Cache
CPU
  • Dual Socket P (LGA 3647)
  • Intel® Xeon® Scalable Processors,
    Dual UPI up to 10.4GT/s
  • Support CPU TDP 70-205W*
Cores
  • Up to 28 Cores with Intel® HT Technology
Note * Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization.
 
System Memory
Memory Capacity
  • 24 DIMM slots
  • Up to 3TB ECC 3DS LRDIMM, 3TB ECC RDIMM, DDR4 up to 2666MHz
Memory Type
  • 2666/2400/2133MHz ECC DDR4 SDRAM
 
On-Board Devices
Chipset
  • Intel® C621 chipset
SAS
  • SAS3 (12Gbps) via Broadcom 3008; IT mode
Network
  • Must bundle with at least one SIOM network card
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video
  • ASPEED AST2500 BMC
 
Input / Output (per Node)
LAN
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 ports (rear)
Video
  • 1 VGA port
DOM
  • 1 SuperDOM (Disk on Module) port
Others
  • M.2 and SATA DOM for boot drive only
 
System BIOS
BIOS Type
  • AMI 32Mb SPI Flash ROM
 
Management
Software
Power Configurations
  • ACPI / APM Power Management
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores, Chipset Voltages, Memory.
  • 4+1 Phase-switching voltage regulator
FAN
  • Fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-827BHD+-R2K22BP
 
Dimensions and Weight
Width
  • 17.6" (447mm)
Height
  • 3.47" (88mm)
Depth
  • 30.11" (765mm)
Package
  • 9.76" (H) x 24.65" (W) x 45.28" (D)
Weight
  • Gross Weight: 114.66 lbs (52.01 kg)
  • Net Weight: 87.13 lbs (39.52 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power status LED
  • HDD activity LED
  • Network activity LEDs
  • Universal Information (UID) LED
 
Expansion Slots (per Node)
PCI-Express
  • 2 PCI-E 3.0 x8 slots
  • 1 PCI-E 3.0 x16 slot
  • 1 SIOM card support
    (must bundle with network card)
 
Drive Bays / Storage (per Node)
Hot-swap
  • 6 SAS3 or 3 NVMe + 3 SAS3 Hot-swap 3.5" drive bays

    Please contact Supermicro Technical Support for additional information about HDD and SSD if mixed. Some restrictions and configuration rules that apply to SSD are different from HDD.
M.2
  • 2 Internal M.2 NVMe/SATA slots
 
System Cooling
Fans
  • 4 Heavy duty 8cm PWM fans with air shroud
 
Power Supply
2200W Redundant Power Supplies with PMBus
Total Output Power
  • 1200W/1800W/1980W/2090/2200W
Dimension
(W x H x L)
  • 45 x 40 x 480 mm
Input
  • 1200W: 100-127Vac / 50-60Hz
  • 1800W: 200-220Vac / 50-60Hz
  • 1980W: 220-230Vac / 50-60Hz
  • 2090W: 230-240Vac / 50-60Hz
  • 2090W: 180-220Vac (for UL/cUL only)
  • 2200W: 220-240Vac (for UL/cUL only)
  • 2090W: 230-240Vdc (for CCC only)
+12V
  • Max: 100A / Min: 0A (100-127Vac)
  • Max: 150A / Min: 0A (200-220Vac)
  • Max: 165A / Min: 0A (220-230Vac)
  • Max: 174.17A / Min: 0A (230-240Vac)
  • Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only)
  • Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only)
  • Max: 174.17A / Min: 0A (230-240Vdc, CCC only)
12Vsb
  • Max: 2.1A / Min: 0A
Output Type
  • Gold Finger
Certification Titanium Level96%  UL/cUL/CB/BSMI/CE/CCC
  Titanium Level
  [ Cert. in progress ]
 
Operating Environment
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature:
       -40°C to 60°C (-40°F to 140°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)

Parts List (Items Included)
Part Number Qty Description
Motherboard / Chassis MBD-X11DPT-B 2 Super X11DPT-B Motherboard
CSE-827BHD+-R2K22BP 1 2U Chassis
Backplane BPN-ADP-6S3008N3-2UB 2 Big Twin 2U Hybrid ADPHDD: 2x SAS3 port + 3 NVMe or SAS3 ports (SAS3008 controller)M.2: 2x SATA or PCIe M.2 ports,HF,RoHS
Backplane BPN-SAS3-827BHQ-N3 1 2U 12-Port 4-Node Hybrid Backplane Supports 3x3.5
Drive Tray(s) MCP-220-00133-0B-BULK 12 Black gen 8 hot-swap 3.5
Parts MCP-240-82718-0N 1 SC827B BigTwin type I (Impact) BPN retention bkt assy
Air Shroud MCP-310-21717-0B 2 SC217B/827B 2U2N BigTwin plastic air shroud for X11DPT-B
Riser Card RSC-P2-88 2 2U LHS TwinPro Riser card with two standard PCI-E x8 slots,H
Heatsink / Retention SNK-P0068PS 2 2U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism
Power Supply PWS-2K22A-1R 2 1U 2200W Redundant Power Supply Titanium, 45(W) X 40(H) X 48
FAN 1 FAN-0162L4 4 80x80x38 mm, 13.5K RPM, HCP, LMV, and LPC Cooling Fan,RoHS/REACH
Optional Parts List
Part Number Qty Description
3.5" to 2.5" Converter Tray MCP-220-00140-0B - Black gen 8 hot-swap 3.5-to-2.5 Tool-less HDD tray, orange tab
Global Services & Support OS4HR3/2/1 - 3/2/1-year onsite 24x7x4 service
OSNBD3/2/1 - 3/2/1-year onsite NBD service
Software SFT-OOB-LIC 1 OOB Management Package (per node license)
Software SFT-DCMS-Single 1 DataCenter Management Package (per node license)
SuperDOM - - Supermicro SATA DOM Solutions
Network Card(s) AOC-S40G-i2Q - Standard LP 2-port 40GbE controller, based on Intel Fortville XL710
AOC-SGP-i2 - Standard LP, 2x GbE RJ45, PCI-Ex4, Intel i350AM2
AOC-SGP-i4 - Standard LP, 4x GbE RJ45, PCI-Ex4, Intel i350
AOC-STG-b4s - Standard LP, 4x 10GbE SFP+, PCI-E x8, Broadcom BCM57840S
AOC-STGN-i2s - Standard LP, 2x 10GbE SFP+, PCI-E x8, Intel 82599ES
AOC-STGN-i1S - Standard LP, 1x 10GbE SFP+, PCI-E x8, Intel 82599EN
AOC-STG-i2T - Standard LP, 2x 10GbE RJ45, PCI-E x8, Intel X540
AOC-STG-i2 - Standard LP, 2x 10GbE CX4, PCI-E x8 Intel 82598EB