|
| SYS-6037R-72RFT+= |
- SuperServer 6037R-72RFT+ (Black)
|
| |
| CPU |
- Intel® Xeon® processor E5-2600 (up to 135W TDP *)
- Dual Socket R (LGA 2011)
* Please contact your Supermicro sales representative for additional details |
| Cache |
|
| System Bus |
|
| GPU/Xeon Phi Support |
- M2050/M2070(Q), up to 135W CPU at 30°C
- M2090, up to 135W CPU at 30°C
- K10 (Kepler), up to 135W CPU at 35°C
- K20 (Kepler), up to 135W CPU at 30°C
- Xeon Phi, up to 135W CPU at 30°C
|
| |
| Memory Capacity |
- 24x 240-pin DDR3 DIMM sockets
- Supports up to 768 GB DDR3 ECC Registered memory (RDIMM) in 24 DIMM sockets
- Supports up to 128 GB DDR3 ECC Un-Buffered memory (UDIMM) in 24 DIMM sockets
|
| Memory Type |
- 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
| Chipset |
|
| SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1, 5, 10
|
| SAS |
- SAS2 via LSI 2208
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| |
| Serial ATA |
- 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
|
| SAS |
|
| LAN |
- 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 9x USB 2.0 ports total
(4x rear + 4x via header + 1x Type A)
|
| VGA |
|
| Serial Port / Header |
- 2x Fast UART 16550 ports: 1 rear and 1 header
|
|
|
| |
|
| Width |
|
| Height |
|
| Depth |
|
| Weight |
- Gross: 74.8lbs (34kg) / Net: 48lbs (21.8kg)
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
| |
| PCI-Express |
- 2x PCI-E 3.0 x16 Full-height Full-length (support 2x GPU/Xeon Phi cards)
- 4x PCI-E 3.0 x8 slots
- Without GPU installed, can support 5x Full-height Full-length, and 1x half length PCI-E card
- With 2x GPU installed, can support 1x Full-height Full-length and 1x Half-length PCI-E cards (both CPUs need to be installed for full access to PCI-E slots. See manual for details)
|
| |
|
| Hot-swap |
- 8x 3.5" Hot-swap SAS/SATA HDD trays
- SAS or enterprise SATA HDD only recommended
|
| Peripheral Bays |
- 2x 5.25" Peripheral Drive Bay
|
| |
|
| Fans |
- 4x 8cm 9.5K RPM, Middle fans
- 2x 8cm 6.7K RPM, Rear Exhaust fan
|
| |
|
| 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
| AC Input |
- 1000W Output @ 100-140V, 12-8A, 50-60Hz
- 1280W Output @ 180-240V, 8-6A, 50-60Hz
|
| DC Output |
- 1000W: +12V/83A; +5Vsb/4A
- 1280W: +12V/106.7A, +5Vsb/4A
|
| Certification |
 
Platinum Certified
[ Test Report ]
|
| |
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
