Home제품정보 MotherboardsDP Xeon®Socket 2011Intel C602J Chipset

X9DR7-TF+

견적상담제품문의

Key Features
  1. Dual socket R (LGA 2011) supports Intel Xeon processor E5-2600
  2. Intel C602J chipset; QPI up to 8.0GT/s
  3. Up to 768GB DDR3 1600MHz* ECC Registered DIMM; 24x DIMM sockets * Depends on memory configuration
  4. Expansion slots: 2 x16 PCI-E 3.0 and 4 x8 PCI-E 3.0
  5. Intel X540 Dual port 10GBase-T
  6. 4x SATA2 and 2x SATA3 ports
  7. 8x SAS2 ports via LSI 2208
  8. Integrated IPMI 2.0 and KVM with Dedicated LAN
  9. 9x USB 2.0 ports (4 rear, 4 via header + 1 Type A)

RoHS

Product SKUs
MBD-X9DR7-TF+ -O
  • X9DR7-TF+ (Standard Retail Pack)
MBD-X9DR7-TF+ -B
  • X9DR7-TF+ (Bulk Pack)
Physical Stats
Form Factor
  • Enhanced E-ATX
Dimensions
  • 13.68" x 13" (34.7cm x 33cm)
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 (up to 135W TDP **)
  • Dual Socket R (LGA 2011)
Cache
  • Up to 20MB
System Bus
  • QPI up to 8 GT/s
** Motherboard supports this maximum TDP. Please verify your system can thermally support.
System Memory
Memory Capacity
  • 24x 240-pin DDR3 DIMM sockets
  • Supports up to 768 GB DDR3 ECC Registered memory (RDIMM) in 24 DIMM sockets
  • Supports up to 128 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM) in 24 DIMM sockets
Memory Type
  • 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • Intel® C602J chipset
SATA
  • SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
  • SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
SAS
  • SAS2 from LSI 2208 (1GB cache)
  • HW RAID 0, 1, 5, 6, 10, 50, 60 support
  • Supports up to 16 drives
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® X540 Dual Port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Video
  • G200 (Nuvoton WPCM450 BMC with graphic controller)
Super I/O
  • Nuvoton W83527HG
Input / Output
SATA
  • 2 SATA 3.0 ports (6Gb/s)
  • 4 SATA 2.0 ports (3Gb/s)
SAS
  • 8 SAS2 ports (6Gb/s)
LAN
  • 2 RJ45 10GBase-T ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 9 USB 2.0 ports total
    (4 rear + 4 via header + 1 Type A)
Video
  • 1 VGA port
Keyboard/Mouse
  • PS/2 Keyboard/Mouse port
Serial Port / Header
  • 2 Fast UART 16550 ports: 1 rear and 1 header
DOM
  • 1 DOM (Disk on Module) power connector
TPM
  • 1 TPM 1.2 20-pin Header
Chassis ( Optimized for X9DR7-TF+)
2U Chassis
  • CSE-826BA-R1K28LPB
  • CSE-826BA-R920LPB
  • CSE-826BE16-R1K28LPB
  • CSE-826BE16-R920LPB
  • CSE-826BE26-R1K28LPB
  • CSE-826BE26-R920LPB
  • CSE-828TQ-R1K43LPB
3U Chassis
  • CSE-835BTQ-R1K28B
  • CSE-835TQ-R920B
  • CSE-836BA-R1K28B
  • CSE-836BE16-R1K28B
  • CSE-836BE26-R1K28B
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
Expansion Slots
PCI-Express
  • 2 (x16) PCI-E 3.0 slots
  • 4 (x8) PCI-E 3.0 slots

    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI
Management
Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • SuperDoctor® III
  • Watch Dog
  • NMI
  • Optional IPMI 1.5 / 2.0
Power Configurations
  • ACPI / APM Power Management
  • Main Switch Override Mechanism
  • CPU Fan auto-off in sleep mode
  • Power-on mode for AC power recovery
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
  • 5 Phase-switching voltage regulator
FAN
  • 9x 4-pin fan headers (up to 9 fans)
  • 9x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 9x Fan Connectors
  • I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Parts List (retail)
  Part Number Qty Description
X9DR7-TF+ MBD-X9DR7-TF+ 1 X9DR7-TF+ Motherboard
I/O Cables CBL-0044L 2 SATA CABLE 61CM FLAT S-S PBF
I/O Cables CBL-0097L-03 2 30AWG 50CM Ipass to 4 SATA, W/50cm SB, S
I/O Shield MCP-260-00042-0N 1 STD I/O shield for X9 socket R server MB with Gasket
Heat Sink
(optional, not included)		 - - CPU Heat Sink reference
TPM security module
(optional, not included)		 AOC-TPM-V20-IFN - IFX TPM Krypton Lite Board Module Rev.1U, SLB9635TT1.2FW3.19 (for 20pin TPM header).