Integrated Board

X9DAX-7F-HFT

Available Colors : Black

Key Features
  • Cooling Optimized Solution
  • Supports Hyper-Speed
  • Qualified low latency NICs here
  • Low latency/jitter optimization guide here
  1. Dual Intel® Xeon® processor E5-2687W v2 (Ivy Bridge)
  2. Up to 512GB DDR3 1600MHz ECC Registered DIMM; 16x DIMM sockets Default: 8x 8GB 1866MHz DDR3 RDIMM
  3. 2x PCI-E 3.0 x16, 3x PCI-E 3.0 x8, 1x UIO PCI-E 3.0 x8 (for SMC UIO) or 1x PCI-E 2.0 x4 (in x8)
  4. I/O ports: 2 GbE LAN, 4 USB 3.0, 2 HD/AC97, 1 IPMI dedicated LAN ports, and 2 IEEE 1394 Header
  5. 8x Hot-swap 3.5" HDD Bays Support SAS2 HW RAID via LSI 2208; 2x Hot-swap 3.5" SATA3 HDD Bays
  6. 1280W Redundant Power Supplies Platinum Level (95%)

Digital Power RoHS 80 PLUS

Product SKUs
SYS-6027AX-72RF-HFT3
  • SuperServer 6027AX-72RF-HFT3 (Black)
Motherboard
Super X9DAX-7F-HFT
Processor/Cache
CPU
  • Dual Intel® Xeon® processor E5-2687W v2 (Ivy Bridge) (up to 150W TDP)
  • Dual Socket R (LGA 2011)
Note
  • † BIOS version 3.0 or above is required
Cache
  • Up to 20MB
System Bus
  • QPI up to 8 GT/s
System Memory
Memory Capacity
  • 8x 8GB DDR3 ECC 1866MHz RDIMM (Default)
  • 16x 240-pin DDR3 DIMM sockets
  • Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • Intel® C602 Chipset
SATA
  • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
  • SATA 3.0 6Gbps with RAID 0, 1
SAS
  • SAS2 from LSI 2208
  • RAID 0, 1, 5, 6, 10, 50, 60 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® i350 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
Audio
  • RealTek ALC889 7.1 High Definition Audio with S/PDIF header
Input / Output (per node)
Serial ATA
  • 2x SATA 3.0 ports (6Gbps)
  • 8x SATA 2.0 ports (3Gbps)
SAS
  • 8x SAS2 ports (6Gbps)
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 4x USB 3.0 (2 front, 2 rear) and 4x USB 2.0 ports
Audio
  • Line-in / Line-out / Microphone Ports
Video
  • 1x VGA port
Serial Port / Header
  • 2x Fast UART 16550 ports
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-829BTQ-R1K28LPB
Dimensions
Width
  • 17.2" (437mm)
Height
  • 3.5" (89mm)
Depth
  • 25.5" (648mm)
Gross Weight
  • 52 lbs (23.6kg)
Available Colors
  • Black
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power status LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Power fail LED
Expansion Slots (per Node)
PCI-Express
  • 2 PCI-E 3.0 x16 slots
  • 3 PCI-E 3.0 x8 slots
  • 1 UIO PCI-E 3.0 x8 (for SMC UIO) or 1 PCI-E 2.0 x4 (in x8) slot
Drive Bays (per Node)
Hot-swap
  • 10x Hot-swap 3.5" SATA HDD trays
Display
LCD Screen
  • Front panel LCD display
Backplane
1x SAS2 / SATA backplane
System Cooling
Fans
  • 4x PWM fans w/ optimal fan speed control
Heatsink
  • 2x Passive CPU Heat Sink
Power Supply
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input
  • 1000W Output @ 100-140V, 8-12A, 50-60Hz
  • 1280W Output @ 200-240V, 6-8A, 50-60Hz
DC Output
  • 1000W: +12V/83A; +5Vsb/4A
  • 1280W: +12V/106.7A, +5Vsb/4A
Certification Platinum Level Certified 95%+
  Platinum Certified
  [ Test Report ]
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5% to 95% (non-condensing)