|
| SYS-1028UX-CR-LL1 |
- SuperServer 1028UX-CR-LL1 (Black)
|
| |
| CPU |
- Intel® Xeon® processor E5-2643 v3
- Dual Socket R3 (LGA 2011)
|
| Core / Cache |
- Up to 6 Cores / Up to 20MB Cache
|
| System Bus |
|
| Note |
- ** Please contact your Supermicro sales representative for additional details.
|
| |
| Memory Capacity |
- 8 X 8GB DDR4 2133MHz (Default)
- 16x 288-pin DDR4 DIMM slots
- Up to 1TB ECC LRDIMM, 768GB ECC RDIMM
|
| Memory Type |
- 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
| Chipset |
- Intel® C612 Express chipset
|
| SAS |
- LSI 3108 SAS3 (12Gbps) controllers; RAID 0, 1, 5, 6, 10, 50 support
|
| SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Graphics |
|
| |
| SAS |
|
| SATA |
|
| NVMe |
- 2x NVMe ports support via optional Add-on Card (AOC-SLG3-2E4)
|
| LAN |
- 4x RJ45 Gigabit Ethernet ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 5x USB 3.0 ports (2 rear, 2 via header, 1 Type A)
|
| Video |
|
| Serial Port / Header |
- 1x Fast UART 16550 serial
- 1x COM port (rear)
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
|
| Software |
- SuperDoctor® 5
- Intel® Node Manager 3.0
- Watch Dog
- NMI
- SMCBU and SMM
- Optional IPMI 1.5 / 2.0
|
| Power Configurations |
- ACPI Power Management
- Power-on mode for AC power recovery
|
|
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Color |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED / UID LED
|
| |
|
| PCI-Express |
Expansion slots via riser card:
- 2x PCI-E 3.0 x16, Full-heigh Full-length
- 1x PCI-E 3.0 x8, Low-profile
- 1x PCI-E 3.0 x8 SAS3 integrated
|
| |
|
| Hot-swap |
- 8x 2.5" Hot-swap SAS3 drive bays
- 2x 2.5" Hot-swap SATA3 drive bays
|
| |
|
| Fans |
- 8x heavy duty fans with optimal fan speed control
|
| Air Shroud |
|
| |
|
| 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
| AC Input |
- 100-127Vac, 50-60Hz
- 200-240Vac, 50-60Hz
|
| +12V |
- Max: 62.5A & Min: 0A (100Vac-127Vac)
- Max: 62.5A & Min: 0A (200Vac-240Vac)
|
| 12V SB |
|
| Certification |
Platinum Level
[ Test Report ]
|
| |
|
| CPU |
- Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 6-Phase-switching voltage regulator
|
| FAN |
- Total of ten 4-pin PWM fans
- 10x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 10x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
|
| Other Features |
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature: 10°C to 35°C (50°F to 95°F)
- Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5% to 95% (non-condensing)
|
|
