Available Colors : Black

Key Features
  • Front I/O
  • Space-efficient, compact design
  • Fast to build and deploy
  • Fast to build and deploy
  1. Intel® Atom processor C2758, SoC, FCBGA 1283, 20W 8-Core
  2. Intel® System-on-Chip Design
  3. 2x 3.5" Fixed SATA3 HDD bays or 4x 2.5" SATA2 HDD optional*
  4. 1x PCI-E 2.0 x8 slot**
  5. Up to 64GB DDR3 1600MHz ECC SO-DIMM in 4 DIMM sockets
  6. Quad GbE ports, IPMI w/ dedicated LAN
  7. DOM power connector
  8. 200W Low-noise power supply w/ PFC
  9. Support Intel® QuickAssist Acceleration Technology

RoHS 80 PLUS

Product SKUs
SYS-5018A-FTN4
  • SuperServer 5018A-FTN4 (Black)
 
Motherboard

Super A1SRi-2758F
 
Processor/Cache
CPU
  • Intel® Atom™ Processor C2758
  • CPU TDP 20W (8-Core)
  • FCBGA 1283
  • System-on-Chip
 
System Memory
Memory Capacity
  • 4x 204-pin DDR3 SO-DIMM slots
  • Supports up to 64GB DDR3 ECC memory
Memory Type
  • 1600/1333MHz ECC DDR3 SDRAM 72-bit, 204-pin gold-plated DIMMs
DIMM Sizes
  • 8GB, 4GB, 2GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • SoC SATA3 (6Gbps), SATA2 (3Gbps)
Network Controllers
  • C2000 SoC I354 Quad GbE Controller (MACs)
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST 2400 BMC
Graphics
  • BMC integrated ASPEED AST2400
USB 3.0
  • Renesas uPD720201
 
Input / Output
Serial ATA
  • 2x SATA3 (6Gbps) ports
  • 4x SATA2 (3Gbps) ports
LAN
  • 4x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 4x USB 3.0 ports (2 rear, 1 Type A, 1 via header)
  • 2x USB 2.0 ports (2 rear)
Serial Port
  • 2x Fast UART 16550 Serial Port (1 rear, 1 via header)
DOM
  • 1x SATA DOM (Disk on Module) power connector
VGA
  • 1x VGA Port
Others
  • TPM 1.2 header
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-505-203B
 
Dimensions and Weight
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 9.8" (249mm)
Weight
  • Net Weight: 8 lbs (3.62 kg)
  • Gross Weight: 12 lbs (5.44 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Information LED (temp., status)
 
Expansion Slots
PCI-E
  • 1x PCI-E 2.0 x8 slot via riser**
 
Drive Bays
HDD
  • 2x 3.5" or 4x 2.5" internal SATA2 hard
      drive bays (optional) *
 
Power Supply
200W Low Noise AC-DC power supply with PFC
AC Voltage
  • 100 - 240V, 50-60Hz, 2.6 Amp Max
+5V
  • 8.0 Amp (max.)
+5V standby
  • 2.0 Amp (max.)
+12V
  • 16 Amp (max.)
-12V
  • 0.5 Amp (max.)
+3.3V
  • 8.0 Amp (max.)
Certification Gold Level Certified
  Gold Certified
 
 
System BIOS
BIOS Type
  • 64Mb SPI Flash EEPROM with AMI UEFI BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • ACPI 5.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-A1SRi-2758F
CSE-505-203B
1
1
Super A1SRi-2758F Motherboard
1U Chassis
Cable 1 CBL-0061L 1 35CM end to end, SATA CABLE, PB FREE, 26AWG, flat
Riser Card RSC-RR1U-E8 1 RSC-RR1U-E8 (Rev 4.00)
Part MCP-120-00063-0N 1 Riser card bracket for slot-7 in SC504
Optional Parts List
  Part Number Qty Description
HDD Bracket MCP-220-00044-0N - Dual 2.5" fixed HDD bracket for SC502, 503, 510, 512, 515U
HDD Bracket MCP-220-00051-0N - Single 2.5" fixed HDD bracket for SC502, 503, 510, 512, 515U