Integrated Board

X10DRH-iT

Available Colors : Black

Key Features
  1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
  2. Up to 1TB ECC DDR4 2133MHz; 16x DIMM slots
  3. 1 PCI-E 3.0 x16, 6 PCI-E 3.0 x8 (slot 1 & 2 occupied by controller and JBOD expansion port)
  4. Dual 10GBase-T LAN w/ Intel® X540
  5. 36x 3.5" Hot-swap SAS3/SATA3 drive bays (24 front + 12 rear); 2x 2.5" optional Hot-swap drive bays (rear); 4x 2.5" internal fixed drive bays
  6. SAS3 via LSI 3008 controller; IT mode
  7. Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
  8. 7x 80mm middle cooling fans
  9. 1280W Redundant Power Supplies Platinum Level (94%)

80 PLUS

Product SKUs
SSG-6048R-E1CR36L
  • SuperServer 6048R-E1CR36L (Black)
Motherboard
Super X10DRH-iT
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3
    family (up to 145W TDP) *
  • Dual Socket R (LGA 2011)
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note * Please contact Supermicro Technical
Support for additional information about
frequency optimized CPUs and specialized
system optimization.
System Memory (per Node)
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel® C612 chipset
SAS
  • SAS3 (12Gbps) via LSI 3008
  • IT mode firmware
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® X540 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Video
  • ASPEED AST2400 BMC
Input / Output
LAN
  • 2x RJ45 10GBase-T LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 3.0 ports (rear)
  • 2x USB 2.0 ports (rear)
  • 1x Type A
VGA
  • 1x VGA port
Serial Port / Header
  • 1x Fast UART 16550 port / 1 Header
Chassis
Form Factor
  • 4U Rackmount
Model
  • CSE-847BE1C-R1K28LPB
Dimensions and Weight
Width
  • 17.2" (437mm)
Height
  • 7" (178mm)
Depth
  • 27.5" (699mm)
Weight
  • Gross Weight: 102.5 lbs (46.4 kg)
  • Net Weight: 65.5 lbs (29.7 kg)
Available Colors
  • Black
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power status LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Power fail LED
Expansion Slots (per Node)
PCI-Express
  • 1x PCI-E 3.0 x16 slot
  • 6x PCI-E 3.0 x8 slots
  • Slot 1 & 2 occupied by controller and JBOD Expansion Port
Drive Bays (per Node)
Hot-swap
  • 36x 3.5" Hot-swap SAS3/SATA3 drive bays
  • Double-sided: 24 front + 12 rear drive bays
Optional
  • 2x 2.5" Hot-swap HDD bays (rear)
  • Fixed internal Drive Bracket supports
    1x 3.5 or 2x 2.5" devices
Backplane
SAS3/SATA3 single expander per backplane
System Cooling (per node)
Fans
  • 7x 80mm middle cooling fans
  • Redundant cooling
Power Supply with Digital Switching Control & PMBus 1.2
1280W High-Efficiency (95%+) power supply
AC Input
  • 1000W Output @ 100-140V, 12-8A, 50-60Hz
  • 1280W Output @ 180-240V, 8-6A, 50-60Hz
DC Output
  • 1000W: +12V/83A; +5Vsb/4A
  • 1280W: +12V/106.7A, +5Vsb/4A
Certification Platinum Level Certified 94%+
  Platinum Certified
  [ Test Report ]
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X10DRH-iT
CSE-847BE1C-R1K28LPB
1
1
Super X10DRH-iT Motherboard
4U Chassis
Backplane BPN-SAS3-826EL1 1 SAS 12G single expander backplane, with LSISAS3x28 expander, support 12x 3.5
Backplane BPN-SAS3-846EL1 1 SAS 12G single expander backplane, with LSI SAS3 expander, support 24x 3.5
Cable 1 CBL-SAST-0531-01 4 Internal Mini-SAS HD to Mini-SAS HD 80cm,30AWG,12Gb/s [FCI],RoHS/REACH
Cable 2 CBL-SAST-0532 2 Internal Mini-SAS HD to Mini-SAS HD 50cm,30AWG,12Gb/s,HF,RoHS/REACH,PBF
Cable 3 CBL-0296L 3 4 pin to 4 pin fan extension cord, for PWM fan. 23cm. 24AWG
Heatsink / Retention SNK-P0048PS 2 2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MB
Power Supply PWS-1K28P-SQ 2 1U 1280W, redundant single output power supply
Add On Card AOC-S3008L-L8E-O-P 1 12Gbps SAS3/HBA/ 2 internal HD connectors/STD Gen3 PCI/122 HD support
Add On Module AOM-SAS3-8I8E-LP 1 8-port Mini SAS HD Int-to-Ext cable adapter w/ LP bracket
Optional Parts List
  Part Number Qty Description
Drive Tray MCP-220-84701-0N
CBL-0179L
CBL-0082L
1
2
1
Internal drive tray for one 3.5" HDD or two 2.5" HDD
SATA cable 70cm
Y split SATA power extension
Peripheral Drives MCP-220-82609-0N - Rear 2 X 2.5" HDD kit (cables & backplane included)
Onsite Service Program OS4HR3/2/1 - 3/2/1-year onsite 24x7x4 service
Onsite Service Program OSNBD3/2/1 - 3/2/1-year onsite NBD service
Software SFT-OOB-LIC 1 OOB Management Package (per node license)
Software SFT-DCMS-Single 1 DataCenter Management Package (per node license)