Integrated Board

X10DRi-T4+

Available Colors : Black

Key Features
  1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC DDR4 2133MHz; 24x DIMM slots
  3. 2 PCI-E 3.0 x16, 4 PCI-E 3.0 x8 (Slot 3 & 4 occupied by controller and JBOD expansion port)
  4. Quad LAN w/ Intel® X540 10GBase-T
  5. 24x 2.5" Hot-swap SAS3/SATA3 drive bays
  6. Hardware RAID controller and JBOD Expansion; RAID 0, 1, 5, 6, 10, 50, 60
  7. Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
  8. 3x 8cm hot-swap redundant PWM fans
  9. 920W Redundant Power Supplies Platinum Level (94%)

80 PLUS

Product SKUs
SSG-2028R-E1CR24N
  • SuperServer 2028R-E1CR24N (Black)
Motherboard
Super X10DRi-T4+
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3
    family (up to 145W TDP) *
  • Dual Socket R (LGA 2011)
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note * Please contact Supermicro Technical
Support for additional information about
frequency optimized CPUs and specialized
system optimization.
System Memory (per Node)
Memory Capacity
  • 24x 288-pin DDR4 DIMM slots
  • Up to 1.5TB ECC LRDIMM, 768GB ECC RDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel® C612 chipset
SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
SAS3 AOC
  • LSI 3108 SAS3 AOC
  • Hardware RAID 0, 1, 5, 6, 10, 50, 60
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® X540 Quad Port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Video
  • ASPEED AST2400 BMC
Input / Output
LAN
  • 4x RJ45 10GBase-T ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 3x USB 3.0 ports (2 rear + 1 Type A)
  • 2x USB 2.0 ports (2 rear)
VGA
  • 1x VGA port
Serial Port / Header
  • 1x Fast UART 16550 port / 1 Header
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-216BE1C-R920LPB
Dimensions and Weight
Width
  • 17.2" (437mm)
Height
  • 3.5" (89mm)
Depth
  • 24.8" (630mm)
Gross Weight
  • 61 lbs (27.7 kg)
Available Colors
  • Black
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power status LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Power fail LED
Expansion Slots (per Node)
PCI-Express
  • 2x PCI-E 3.0 x16 slots
  • 4x PCI-E 3.0 x8 slots
  • Slot 3 & 4 Occupied by Controller and
    JBOD Expansion Port
Drive Bays (per Node)
Hot-swap
  • 24x 2.5" Hot-swap SAS3/SATA3 HDD bays
Optional
  • 2x 2.5" Hot-swap HDD bays (rear)
Backplane
SAS3 12Gbps single expander backplane, w/ 24x SAS3 2.5"
drive slots and 4x mini-SAS HD connectors for SAS3 uplink/downlink
System Cooling (per node)
Fans
  • 3x 8cm 7K RPM, 4-pin PWM fans
Power Supply with Power Distributor
920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C
AC Input
  • 100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output
  • 4 Amp @ +5V standby
  • 75 Amp @ +12V
Certification Platinum Level Certified 94%+
  Platinum Certified
  [ Test Report ]
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5% to 95% (non-condensing)