Home제품정보 Twin SolutionsNew!2U TwinPro™

SYS-6028TP-DNCR

견적상담제품문의

Available Colors : Black

Key Features
  • Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
  1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
  2. Up to 1TB ECC LRDIMM, 512GB ECC RDIMM, up to 2133MHz; 16x DIMM sockets
  3. 1x PCI-E 3.0 x16, 1x PCI-E 3.0 x8 slots
  4. Intel® i350 Dual port GbE LAN
  5. Integrated IPMI 2.0 with KVM and Dedicated LAN
  6. 6x 3.5" Hot-swap drive bays (Up to 4x NVMe + 2x SAS3 or 6x SAS3)
  7. LSI 3008 SAS3 controller (8 ports); RAID 0, 1, 10
  8. 1600W Redundant Power Supplies Titanium Level Digital (96%)

80 PLUS

Product SKUs
SYS-6028TP-DNCR
  • SuperServer 6028TP-DNCR (Black)
Motherboard
Super X10DRT-P
Processor/Cache (per Node)
CPU
  • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
  • Dual Socket R3 (LGA 2011)
Core / Cache
  • Up to 18 Cores / Up to 45MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note * Please contact Supermicro Technical Support
for additional information about frequency
optimized CPUs and specialized
system optimization.
System Memory (per Node)
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel® C612 Express chipset
SAS
  • LSI 3008 SAS3 (12Gbps) controller;
    RAID 0, 1, 10 support
  • Note: In order to support NVMe drives,
    both CPU socket must be populated
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® i350 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX,
    and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC
Input / Output (per Node)
SAS
  • 6x SAS3 (12Gbps) ports
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 3.0 ports total (2x rear)
VGA
  • 1x VGA port
Serial Port / Header
  • 1x Fast UART 16550 port / 1 Header
    (internal)
Others
  • 1x mSATA (full size) and one SATADOM
    support on the daughter card
  • 1x SATADOM support on the motherboard
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-827HD+-R1K68B
Dimensions and Weight
Width
  • 17.25" (438mm)
Height
  • 3.47" (88mm)
Depth
  • 30.5" (774mm)
Weight
  • Gross Weight: 85 lbs (38.6kg)
  • Net Weight: 66 lbs (29.9 kg)
Available Colors
  • Black
Front Panel
Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power status LED
  • HDD activity LED
  • 2x Network activity LEDs
  • Universal Information (UID) LED
Expansion Slots (per Node)
PCI-Express
  • 1x PCI-E 3.0 x16 slot
  • 1x PCI-E 3.0 x8 slot
Drive Bays (per Node)
Hot-swap
  • 6x 3.5" Hot-swap drive bays:
    Up to 4x NVMe + 2x SAS3 or 6x SAS3
System Cooling (per node)
Fans
  • 4x 8cm heavy duty PWM fans
    with optimal fan speed control
Power Supply
1600W Titanium Level (96%) High-efficiency Redundant Single Output Power Supplies
AC Input
  • 800W Output @ 100-140V, 7-10A, 50-60Hz
  • 1600W Output @ 180-240V, 8-11A, 50-60Hz
DC Output
  • 800W: +12V/67A, +5Vsb/1A
  • 1600W: +12V/133A, +5Vsb/1A
Certification Titanium Level Certified 96%
  Titanium Level Certified
  [ Test Report ]
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X10DRT-P
CSE-827HD+-R1K68B 		2
1		 Super X10DRT-P Motherboard
2U Chassis
Backplane BPN-ADP-8S3008N4-2UP 2 2U adapter card for 2U TwinPro system; LSI3008 on board to provide 8x SAS3 ports, 4x NVMe ports, 1x mSATA port and 1x SATADOM port,HF,RoHS/REACH
Backplane BPN-SAS3-827HD-N4 1 Backplane for TwinPro with support up to 4x 3.5" SAS3/SATA3 HDD/SSD and 8x SAS3/SATA3/NVMe Storage Devicse. Each node supports up to 2xSAS3/SATA3 HDD/SSD and 4 SAS3/SATA3/NVMe devices,HF,RoHS/REACH
Heatsink / Retention SNK-P0048PS 4 2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MB
Power Supply PWS-1K68A-1R 2 1U 1600W Redundant Titanium Power Supply 76mm width 27Pair,PBF
Optional Parts List
  Part Number Qty Description
Onsite Service Program OS4HR3/2/1 - 3/2/1-year onsite 24x7x4 service
Onsite Service Program OSNBD3/2/1 - 3/2/1-year onsite NBD service
Software SFT-OOB-LIC 2 OOB Management Package (per node license)
Software SFT-DCMS-Single 2 DataCenter Management Package (per node license)