Home제품정보 Twin SolutionsNew!FatTwin™

SYS-F618R2-RC1+

견적상담제품문의

Available Colors : Black

Key Features
  • 8 Hot-plug System Nodes in 4U Each node supports:
  1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
  2. Up to 1TB ECC DDR4 2133MHz; 16x DIMM slots
  3. Expansion slots: 1 PCI-E 3.0 x16 (LP) 1 PCI-E 3.0 x8 (Micro Low Profile)
  4. I/O ports: 2 GbE ports, 1 VGA, 1 COM/Serial port, 2 USB 3.0 ports
  5. Built-in Server management tool (IPMI 2.0, KVM/media over LAN) with dedicated LAN port
  6. 6x 2.5" Hot-swap SAS/SATA or 4x 2.5" Hot-swap SAS/SATA + 2x SAS/SATA/ NVMe hybrid; SAS3 via LSI 3108
  7. 3x heavy duty internal fans
  8. 2000W High efficiency (96%) Redundant PSU; Titanium Level

80 PLUS

Product SKUs
SYS-F618R2-RC1+
  • SuperServer F618R2-RC1+ (Black)
Motherboard
Super X10DRFR-N
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note * Please contact Supermicro Technical
Support for additional information about
frequency optimized CPUs and specialized
system optimization.
System Memory
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel® C612 Express chipset
SAS
  • LSI 3108 SAS3 (12Gbps) controller;
    HW RAID 0, 1, 5, 6, 10, 50, 60
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® i350-AM2 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC
Input / Output (per Node)
SAS
  • 6x SAS3 (12Gbps) ports
NVMe
  • 2x Internal NVMe ports (PCI-E 3.0 x4)
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
VGA
  • 1x VGA port
USB
  • 2x USB 3.0 ports
Serial Port / Header
  • 1x Fast UART 16550 port
Management
Software
  • Intel® Node Manager
  • SuperDoctor® 5
  • Watch Dog
  • NMI
  • IPMI 2.0
  • SMCBU and SMM
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
Chassis
Form Factor
  • 4U Rackmount
Model
  • CSE-F418BC-R2K04B
Dimensions and Weight
Width
  • 17.63" (448mm)
Height
  • 6.96" (177mm)
Depth
  • 29" (737mm)
Package
  • 28.3" (W) x 15.0" (H) x 42.4" (D)
Weight
  • Net Weight: 150 lbs (68.04 kg)
  • Gross Weight: 200 lbs (90.71 kg)
Available Colors
  • Black
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power status LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Power fail LED
Expansion Slots (per Node)
PCI-Express
  • 1x PCI-E 3.0 x16 Low-profile
  • 1x PCI-E 3.0 x8 (Micro LP)
  • MicroLP Adapter Matrix (Networking options)
Drive Bays (per Node)
Hot-swap
  • 6x 2.5" Hot-swap SAS/SATA or 4x 2.5"
    Hot-swap SAS/SATA + 2x SAS/SATA/NVMe hybrid
Backplane
1x SAS/SATA backplane
System Cooling (per node)
Fans
  • 3x 4cm 14k RPM middle fans
Power Supply with Digital Switching Control
2000W Titanium Level (96%) High-efficiency Redundant Power Supplies
Total Output Power
  • 1000W/1800W/1980W/2000W
AC Input
  • 100-127 V, 50-60 Hz
  • 200-220 V, 50-60 Hz
  • 220-230 V, 50-60 Hz
  • 230-240 V, 50-60 Hz
+12V
  • Max: 83.3A & Min: 0A (100Vac-127Vac)
  • Max: 150A & Min: 0A (200Vac-220Vac)
  • Max: 165A & Min: 0A (220Vac-230Vac)
  • Max: 166.7A & Min: 0A (230Vac-240Vac)
5V SB
  • Max: 1A / Min: 0A
Certification Titanium Level Certified 96%
  Titanium Level
  [ Test Report ]
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5% to 95% (non-condensing)