Home제품정보 Twin SolutionsNew!FatTwin™

SYS-F628R3-RTBPTN+

견적상담제품문의

Available Colors : Black

Key Features
  • 4 Hot-plug System Nodes in 4U Each node supports:
  1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
  2. Up to 1TB ECC DDR4 2133MHz; 16x DIMM slots
  3. Expansion slots: 1 PCI-E 3.0 x16 (LP) 1 PCI-E 3.0 x8 (Micro Low Profile) See Cable Configuration Map
  4. I/O ports: 2 10GBase-T, 1 video, 1 COM/Serial port, 2 USB 3.0 ports
  5. Built-in Server management tool (IPMI 2.0, KVM/media over LAN) with dedicated LAN port
  6. 8x 3.5" Hot-swap SATA3 or 6x 3.5" Hot-swap SATA3 + 2x SATA/NVMe hybrid
  7. 2x Internal NVMe ports (4x PCI-E 3.0)
  8. 2x 80mm 11k RPM middle fans
  9. 1280W Redundant Power Supplies Platinum Level (95%)

Digital Power 80 PLUS

Product SKUs
SYS-F628R3-RTBPTN+
  • SuperServer F628R3-RTBPTN+ (Black)
Motherboard
Super X10DRFR-NT
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note * Please contact Supermicro Technical
Support for additional information about
frequency optimized CPUs and specialized
system optimization.
System Memory
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel® C612 Express chipset
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® X540 Dual Port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC
Input / Output (per Node)
Serial ATA
  • 8x SATA3 (6Gbps) ports
  • 2x SATA3 powered ports that support SATA DOM
NVMe
  • 2x Internal NVMe ports (4x PCI-E 3.0)
LAN
  • 2x RJ45 10GBase-T ports
  • 1x RJ45 Dedicated IPMI LAN port
VGA
  • 1x VGA port
USB
  • 2x USB 3.0 ports
Serial Port / Header
  • 1x Fast UART 16550 port
Management
Software
  • SuperDoctor® 5
  • Watch Dog
  • NMI
  • IPMI 2.0
  • SMCBU and SMM
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
Chassis
Form Factor
  • 4U Rackmount
Model
  • CSE-F424AS-R1K28B
Dimensions and Weight
Width
  • 17.63" (448mm)
Height
  • 6.96" (177mm)
Depth
  • 29" (737mm)
Package
  • 28.3" (W) x 15.0" (H) x 42.4" (D)
Weight
  • Net Weight: 105 lbs (47.63 kg)
  • Gross Weight: 150 lbs (68.04 kg)
Available Colors
  • Black
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power status LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Power fail LED
Expansion Slots (per Node)
PCI-Express
  • 1 PCI-E 3.0 x16 (LP) + 1 Micro LP
  • MicroLP Adapter Matrix (Networking options)
Drive Bays (per Node)
Hot-swap
  • (6+2) 3.5" Hot-swap SATA3 HDD trays
Backplane
  • 1x SAS/SATA backplane
  • 1x SAS/SATA/NVMe hybrid (2 slots)
System Cooling (per node)
Fans
  • 2x 8cm 11k RPM middle fans
Power Supply
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input
  • 1000W Output @ 100-140V, 8-12A, 50-60Hz
  • 1280W Output @ 180-240V, 6-8A, 50-60Hz
DC Output
  • 1000W: +12V/83A; +5Vsb/4A
  • 1280W: +12V/106.7A, +5Vsb/4A
Certification Platinum Level Certified 95%+
  Platinum Certified
  [ Test Report ]
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X10DRFR-NT
CSE-F424AS-R1K28B		 4
1		 Super X10DRFR-NT Motherboard
4U Chassis
Backplane BPN-SAS-F424-A6 4 6x 3.5
Backplane BPN-SAS3-F424-A2N2 4 12Gbps Hybrid Backplane for 2 x 3.5
Backplane BPN-ADP-F418LS 4 Power Distribution Board for X10DRFR,RoHS/REACH,PBF
Cable 1 CBL-0157L-02 8 8 pin to 8 pin ribbon SGPIO cable with tube, 27cm, PBF
Cable 2 CBL-0481L 4 81CM 30AWG SATA S-S cable
Cable 3 CBL-0484L 12 55cm 30AWG SATA S-S cable
Cable 4 CBL-0489L 8 70cm SATA cable S-RA 30AWG
Cable 5 CBL-SAST-0623 8 Internal Mini-SAS HD cable for PCIe SSD NVMe, 12Gb/s, 45cm,30AWG,RoHS/REACH
Cable 6 CBL-0480L 4 4 pins to 4 pins 40cm PDB to MB power cable HF. 18AWG
Cable 7 CBL-0486L 8 2x2 to 2x2 15cm power cable HF. 18AWG
Cable 8 CBL-OTHR-0022L 4 20 to 20 pin cable for BPN-ADP-F418LS,7.5cm, 28AWG,RoHS/REACH,PBF
Cable 9 CBL-SAST-0692 4 Internal cross-over mini SAS HD to 2 SATA, S. 23cm. 30AWG [Amphenol],RoHS/REACH
Heatsink / Retention SNK-P0048P 4 2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Square ILM MB
Heatsink / Retention SNK-P0048PS 4 2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MB
Power Supply PWS-1K28P-SQ 4 1U 1280W, redundant single output power supply
Optional Parts List
  Part Number Qty Description
Software SFT-OOB-LIC 4 OOB Management Package (per node license)
Software SFT-DCMS-Single 4 DataCenter Management Package (per node license)
Drive Carrier MCP-220-93801-0B 2/node Drive carrier 3.5" to 2.5" with adapter tray
Additional Power Kit:
Mounting Bracket
Power adapter Board		  
MCP-120-42405-0N
BPN-ADP-2UPWR-O-P		  
1/node
1/node		  
2nd power adapter mounting bracket *
Power adapter board *

* Required for certain configurations. Please contact Supermicro for additional details.