Available Colors : Black

Key Features
  • Hot-plug System Nodes in 4U Front I/O. 6x GPU/Xeon Phi per node. Each node supports:
  1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 family†
  2. Up to 1TB ECC DDR3, up to 1866MHz; 16x DIMM sockets
  3. 6x PCI-E 3.0 x16 for Double-width GPU/Xeon Phi; 2x PCI-E 3.0 x8 slots
  4. Front I/O ports: Dual GbE LAN, 2x USB 2.0, and 1x VGA connector
  5. Built-in Server management tool (IPMI 2.0, KVM/media over LAN) with dedicated LAN port
  6. 6x 2.5" Hot-swap SATA HDDs Bays
  7. 2000W Redundant Power Supplies Platinum Level (94%+)

Digital Power RoHS 80 PLUS

Product SKUs
SYS-F647G2-FT+
  • SuperServer S-F647G2-FT+ (Black)
Motherboard
Super X9DRFF-iG+
Processor/Cache
CPU
  • Dual Socket R (LGA 2011)
  • Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 130W TDP)
Note
  • † BIOS version 3.0 or above is required
Cache
  • Up to 30MB
System Bus
  • QPI up to 8 GT/s
GPU/Xeon Phi Support
  • 6x Double-width GPU/Xeon Phi per node (total of 12x GPU/Xeon Phi cards in 4U)
  • Supports Intel Xeon Phi
  • Supports NVIDIA K10/K20/K20X (Kepler), K1/K2, and M2090/M2075
System Memory (per node)
Memory Capacity
  • 16x 240-pin DDR3 DIMM sockets
  • Up to 1TB DDR3 ECC LRDIMM
  • Up to 512GB DDR3 ECC Registered memory (RDIMM)
  • Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 64GB, 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • Intel® C602 Chipset
AHCI SATA
  • SATA2 (3Gbps) with RAID 0, 1, 5, 10
  • SATA3 (6Gbps) with RAID 0, 1
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® i350 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201F PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
Input / Output (per node)
AHCI SATA
  • 2x SATA 3.0 ports (6Gbps)
  • 4x SATA 2.0 ports (3Gbps)
LAN
  • 2x RJ45 Gigabit Ethernet ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 2.0 ports
VGA
  • 1x VGA port
Serial Port / Header
  • 1x Fast UART 16550 port
Chassis
Form Factor
  • 4U Rackmount
Model
  • CSE-F442BG-R2K02BP
Dimensions
Width
  • 17.63" (448mm)
Height
  • 6.96" (177mm)
Depth
  • 35" (889mm)
Package
  • 25.6" (W) x 11.8" (H) x 48.0" (D)
Weight
  • Net Weight: 105 lbs (47.63 kg)
  • Gross Weight: 150 lbs (68.04 kg)
Available Colors
  • Black
Front Panel
Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power status LED
  • System Overheat / Power Fail LED
  • UID LED
Expansion Slots (per node)
PCI-Express
  • 6x PCI-E 3.0 x16 FH, FL slots (support 6x Double-width GPU/Xeon Phi)
  • 2x PCI-E 3.0 x8 FH, HL slots
Drive Bays (per node)
Hot-swap
  • 6x 2.5" Hot-swap SATA HDD bays
System Cooling
Fans
  • 8x 8cm heavy duty fans with air shroud and PWM fan speed control
Power Supply
2000W Redundant Power Supplies with I2C & PMBus
AC Input
  • 1100W Output @ 100-120V, 12.7-10.5A, 50-60Hz
  • 1400W Output @ 120-140V, 13.5-11.5A, 50-60Hz
  • 1800W Output @ 200-220V, 10.0-9.5A, 50-60Hz
  • 1980W Output @ 220-230V, 10.0-9.8A, 50-60Hz
  • 2000W Output @ 230-240V, 10.0-9.8A, 50-60Hz
5Vsb
  • 4A
I2C Remote Monitoring
  • FRU Data / SMBus / PMBus
Certification Platinum Level Certified 95%+
  Platinum Certified
  [Cert. in progress]
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X9DRFF-iG+
CSE-F442BG-R2K02BP
4
1
Super X9DRFF-iG+ Motherboard
4U Chassis
Backplane BPN-ADP-F418L 4 BPN;SASADP;SAS827-H8;H8DTT;cable req
Backplane BPN-ADP-4UGPU-P 4 Backplan adapter card for 4UGPU,RoHS/REACH,PBF
Backplane BPN-SAS-I28A 2 BPN-SAS-I28A
Cable 1 CBL-PWEX-0460-05 2 8 pin male to two big 4 pin female power cable, 35cm and 22cm. 18AWG,HF,RoHS/REACH,PBF
Cable 2 CBL-SAST-0583 4 Cross-over Ipass to 4 SATA w/SB. S. 24cm. 30AWG,HF,RoHS/REACH,PBF
Riser Card RSC-R2UFF-X2E16B 2 RSC-R2UFF-X2E16B ,RoHS/REACH,PBF
Riser Card RSC-R4UFF-A2E16A 2 RSC-R4UFF-A2E16A
Riser Card RSC-R4UFF-A4E16B 2 RSC-R4UFF-A4E16B
Heatsink / Retention SNK-P0048PS 4 2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MB
Optional Parts List
  Part Number Qty Description
Internal Fan FAN-0150L4 8 Rear internal fan for cooling enhancement
Software SFT-OOB-LIC 2 OOB Management Package (per node license)
Software SFT-DCMS-Single 2 DataCenter Management Package (per node license)