Home제품정보 Chassis1U Rackmount3.5” HDD ChassisSC815

CSE-815TQ-R706WB

견적상담제품문의

Available Colors : Black

Key Features
  1. 700W/750W redundant Platinum Level (PWS-706) or Gold level (PWS-704) high-efficiency power supplies
  2. 4x 3.5" Hot-swap SAS/ SATA Drive Bays
  3. 1x Slim DVD-ROM Drive (optional)
  4. 4x 4cm Counter-rotating PWM fans
  5. 2x Full-height I/O Expansion slots & 1x Low-profile I/O Expansion slot
  6. Power Switch, Reset, UID Button & 5 LED Indicators
  7. Optimize for WIO (W series) MB
  8. Full SES2 support is available with SAS motherboards and other compatible components

80 PLUS

Product SKUs
CSE-815TQ-R706WB
  • SuperChassis 815TQ-R706WB (Black)
 
Form Factor
• 1U chassis for motherboard support size of 12" x 13"
• Optimized for WIO (W series) motherboards
 
Processor Support
Supports dual, single Intel® / AMD processors
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 25.6" (650mm)
Gross Weight
  • 36 lbs (16.3kg)
Package
  • 23.5" x 8.5" x 33.7"
Available Colors
  • Black
 
Expansion Slots
  • 2x Full-height Expansion Slots (Riser Card Required)
  • 1x Low-profile Expansion Slot (Riser Card Required)
 
Drive Bays
Hot-swap
  • 4x 3.5" SAS / SATA Hot-swap drive trays
  • SAS or enterprise SATA HDD only recommended
 
SAS / SATA Backplane
1x 1U SAS / SATA backplane
 
Peripheral Drives
DVD-ROM
  • Slim DVD-ROM drive (optional)
 
Front Panel
Buttons
  • Power On/Off Button
  • System Reset Button
  • UID Button
LEDs
  • 2x Network activity LEDs
  • Fan Fail/System Over Heat LED
  • Hard drive activity LED
  • Power LED
  • Unit Identification (UID) LED
Motherboard(s) for CSE-815TQ-R706WB
X10DRW-E
X10DRW-ET
X10DRW-i
X10DRW-iT
X10DRW-N
X10DRW-NT
X10SRW-F
System Cooling
Fans
  • 4x 40x56mm counter-rotation PWM fan
 
Operating Environment (System)
Operating Temperature Range
  • 5°C ~ 35°C (41°F ~ 95°F)
Non-Operating Temperature Range
  • -40°C ~ 60°C (-40°F ~ 140°F)
Operating Relative Humidity Range
  • 8% ~ 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
 
Power Supply
700W/750W Redundant AC-DC high-efficiency power supply with PMBus and I2C
AC Voltage
  • 700W: 100 - 140 V, 50-60 Hz
  • 750W: 200 - 240V, 50-60 Hz
DC Output +5V standby
  • 3 Amp
DC Output +12V
  • 700W: 58 Amp @ 100-140V
  • 750W: 62 Amp @ 200-240V
Certification Platinum Level Certified   Platinum Certified
  [Test Report]
 
Regulatory (Power Supply)
Power Supply Safety / EMC
  • USA - UL listed, FCC
  • Canada - CUL listed
  • China - CCC Mark
  • Europe/CE Mark
  • EN 60950/IEC 60950-Compliant
  • Germany - TUV Certified
Standard Parts List
  Part Number Qty Description
Chassis CSE-815TQ-R706WB 1 1U Chassis (Black)
Backplane BPN-SAS-815TQ-O-P 1 BPN-SAS-815TQ-O-P
Cable 1 CBL-0157L 1 8 pin to 8 pin ribbon SGPIO cable with tube , 40cm, PBF
Cable 2 CBL-0180L-01 1 SET OF 4 SATA 70/59/48/38CM ROUND S-RA, 26AWG
Power Supply PWS-706P-1R 2 1U 750W redundant power width 54.5mm(Platinum),HF,RoHS/REACH,PBF
Power Distributor PDB-PT112-2420 1 SC112 20PIN REDUNDANT POWER DISTRIBUTOR
Air Shroud MCP-310-19002-0N 1 SC815/113/116 Intel DP X9, X8 PC air shroud, 12x13MB
Cable 3 CBL-0335L 1 FRONT CTL CABLE 20 PIN TO 20 PIN W/TUBE,73CM,PBF. 28AWG
Peripheral Drive 1 CSE-PT93L-B 1 Black DVD dummy cover for SC813, 813M, 815, PBF-RoHS
Fan 1 FAN-0156L4 4 40x40x56 mm 13K-11K RPM Counter-rotating Fan,RoHS/REACH
Fan 2 FAN-0086L4 4 40x56 4Pin PWM, Primary for SC815, Secondary for SC818, 825M
Front Panel FPB-FP815U 1 815 UIO front control board (U)
Fan Holder MCP-340-00035-0B 2 Dummy fan 40x56mm for 40x56 counter-rotating fan (cost-effective)
Fan Holder CSE-PT0135 1 FAN HOLDER FOR SIX 40X56MM COUNTER ROTATING FANS
Drive Tray(s) MCP-220-00075-0B 4 Black gen 5.5 hot-swap 3.5\" HDD tray
Part(s) MCP-120-00053-0N 2 Blank FH L bracket w/o SCSI cutout for SC825,836,846,743
Part(s) MCP-120-00030-0N 1 Blank LP L-bracket (1 raw of capsule hole)
Mounting Rails MCP-290-00054-0N 1set Rail set, quick/quick, optional for 1U 17.2
Rear Window MCP-240-00098-0N 1 WIO rear window for SC113, SC815 Redundant PWS
Optional Parts List
  Part Number Qty Description
Front Tray CSE-PT40(B) - Front USB and COM tray (Occupies Slim Floppy Drive Location)
Heatsink / Retention - - Please refer to our Thermal Components Matrix
Mounting Rails MCP-290-00056-0N
MCP-290-00052-0N-BULK
MCP-290-00054-0N		 -
-
-		 19" to 26.4" outer rail, /quick, for 1U 17.2" W chassis
25.6" to 33.05" outer rail, /quick, for 1U 17.2" W chassis (10 sets/pack)
25.6" to 33.05" rail set, quick/quick, for 1U 17.2" W chassis
Peripheral Drives FPD-TEAC-S(B)
CSE-PT91L		 -
-		 TEAC 3.5" 1.44MB Slim Floppy Drive (B = black)
Slim FDD kit
Peripheral Drives DVM-PNSC-824B
CSE-PT92L		 -
-		 Black slim IDE DVD (8x DVD, 24x CDR), Panasonic
Slim IDE DVD kit (include backplane, cable)
Peripheral Drives DVM-TEAC-DVD-SBT3
DVM-PNSC-DVD-SBT3
MCP-220-81502-0N		 -
-
-		 Black slim SATA DVD (8x DVD, 24x CDR), TEAC
Black slim SATA DVD (8x DVD, 24x CDR), Panasonic
Slim SATA DVD kit (include backplane, cable)
Trays MCP-220-83601-0B
MCP-290-00036-0B		 -
-		 Black FDD dummy tray, supports 1x 2.5" slim HDD (9.6mm thick)
Black DVD dummy tray, supports 1x 2.5" slim HDD (9.6mm thick)
Front Bezel
( Compatibility Table )		 CSE-PTFB-813LB (black)
CSE-PTFB-813 (beige)
MCP-210-00007-01 (LCD)		 - Front Bezel Cover with Key Lock & Filter, Black, Beige, LCD options
LCD/OLED Solutions - - Please reference the LCD/OLED Display Solutions for details
Adaptor HDD carrier MCP-220-00043-0N - Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray