Key Features
  1. Intel® Pentium™ Processor N4200 (6W, 4C)
  2. Intel® Goldmont microarchitecture 14nm System-on-Chip
  3. Up to 8GB 1866MHz DDR3L Non-ECC SO-DIMM in 1 sockets
  4. Dual GbE LAN with Intel® i210-AT
  5. 1 M.2 B-Key 2280, 1 Full size Mini-PCI-E, 1 SATA 3.0
  6. 1 HDMI, 1 VGA, 1 48-bit LVDS, Intel® HD Graphic 3 independent displays
  7. 1 USB 3.1 Gen2 Type-C port, 2 USB 3.0 ports, 4 USB 2.0 ports, 4 COM ports, 1 SATA 3.0, 8-bit GPIO, SMBus
  8. Supports on board TPM 2.0
  9. Supports 12V DC power input

Product SKUs
MBD-X11SAN
  • X11SAN
  • (Bulk Pack)
 
Physical Stats
Form Factor
  • 3.5" SBC
Dimensions
  • 5.7" x 4.0" (14.6cm x 10.16cm)
 
Processor/Cache
CPU
  • Intel® Pentium™ Processor N4200
  • Single Socket FCBGA1296 supported; CPU TDP support 6W
 
System Memory
Memory Capacity
  • Up to 8GB Unbuffered non-ECC SO-DIMM, DDR3-1866MHz, in 1 DIMM slots
Memory Type
  • DDR3L up to 1866Mhz 8GB
DIMM Sizes
  • 2GB, 4GB, 8GB
Memory Voltage
  • 1.35V
Error Detection
  • N/A
 
On-Board Devices
Chipset
  • System on Chip
SATA
  • SoC controller for 1 SATA3 (6 Gbps) ports;
Network Controllers
  • Dual LAN with Intel® Ethernet Controller I210-AT
Audio
  • ALC 888S HD Audio
Graphics
  • Intel® HD Graphics
 
Input / Output
USB
  • 4 USB 2.0 ports (4 via header(s))
  • 2 USB 3.0 ports (2 rear)
  • 1 USB 3.1 ports (1 Type C)
Video Output
  • 1 VGA port(s), 1 LVDS port(s), 1 HDMI port(s)
Serial Port / Header
  • 4 COM Ports (4 header(s)), (2 RS232, 2 RS232/422/485, RS-485 supports Auto flow control)
TPM
  • 1 TPM 2.0 Chip
Others
  • 1 HD Audio header (Mic-in/Line-Out) ,1 8-bit GPIO header ,1 SMBus header ,1 panel backlight power header ,1 speaker ,1 system Fan
Expansion Slots
PCI-E
  • 1 Full size Mini-PCIe (USB2.0 1,PCIe Gen2 x 1), 1 M.2 2280 B-Key for SATA or PCIe SSD (2242/3042 B-key M.2 module is supported by extender bracket)
M.2
  • Interface: SATA and PCIe 2.0 x1 and USB 2.0
  • Form Factor: B-Key 2280
 
System BIOS
BIOS Type
  • AMI UEFI
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • ACPI 5.0
  • SMBIOS 2.7.1
  • UEFI 2.4
 
Management
Software
  • SuperDoctor® 5, Watchdog
Power Configurations
  • +12V DC Power Input
  • ACPI Power Management
  • Control of power-on for recovery from AC power loss
  • Force Power On by Jumpe
 
PC Health Monitoring
Voltage
  • +1.35V, +12V, +3.3V, +5V, 3.3V standby, System level control, System temperature, VBAT, VCGI
FAN
  • 1x 4-pin fan header (up to 1 fan)
  • Fan speed control
  • Low noise fan speed control
  • PWM fan speed control
  • System level control
  • Thermal control tachometer fan connectors
Temperature
  • CPU thermal trip support
LED
  • Standby alert LED
Other Features
  • 4-pin 12v DC power connector
  • ACPI power management
  • Control of power-on for recovery from AC power loss
  • CPU thermal trip support for processor protection
  • M.2 NGFF connector
  • RoHS
  • System level control
  • WOL
 
Operating Environment
Operating Temperature Range
  • 0°C ~ 60°C (32°F ~ 140°F)
Non-Operating Temperature Range
  • -40°C - 85°C (-40°F - 185°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 10% ~ 95% (non-condensing)
Parts List (Bulk Package)
Name Part Number Qty Description
Motherboard MBD-X11SAN 1 X11SAN Motherboard
SATA Power Cable CBL-PWEX-0982 1 SATA Power Cable 25cm
SATA cable CBL-SAST-0538 1 SATA Data cable 29CM
Heatsink SNK-C0103L-1 1 X11SAN Fanless Heatsink with height 19mm
QRG MNL-1935-QRG 1 Motherboard Quick Reference Guide

Parts List (Retail Package)

Name Part Number Qty Description
Motherboard MBD-X11SAN 1 X11SAN Motherboard
Audio Cable CBL-OTHR-0986 1 Audio Cable 20cm
COM Cable CBL-CUSB-0984 1 COM Cable 20cm
SATA Power Cable CBL-PWEX-0982 1 SATA Power Cable 25cm
USB Cable CBL-CUSB-0983 1 USB2.0 cable 20cm
SATA cable CBL-SAST-0538 1 SATA Data cable 29CM
Heatsink SNK-C0103L-1 1 X11SAN Fanless Heatsink with height 19mm
QRG MNL-1935-QRG 1 Motherboard Quick Reference Guide

Chassis (Optimized for X11SAN)
1U 2U 3U Mid/Mini-Tower 4U/Tower
       

  = Most optimized Chassis for SuperServer Configuration
Blue color = Compatible
Green color = Global SKU & Compatible 
Red dot & green color = Optimized + Global SKU