Key Features
  1. Intel® Xeon® processor D-1518, Single socket FCBGA 1667; 4-Core, 8 Threads, 35W
  2. System on Chip
  3. Up to 128GB ECC RDIMM DDR4 2133MHz or 64GB ECC/non-ECC UDIMM in 4 sockets
  4. 1 PCI-E 3.0 x16, M.2 PCI-E 3.0 x4 (SATA support), M Key 2242/2280
  5. 2 10GbE and 2 GbE LAN ports
  6. 6 SATA3 (6Gbps) ports via SoC
  7. 2 USB 3.0 ports (rear) 4 USB 2.0 ports (via headers)
  8. 1 SuperDOM, 1 COM, TPM header, GPIO and SMbus headers
  9. 12V DC input and ATX Power Source

Product SKUs
Motherboard
  • X10SDV-4C-TLN4F (Bulk Pack)
 
Physical Stats
Form Factor
  • Mini-ITX
Dimensions
  • 6.7" x 6.7", (17cm x 17cm)
 
Processor/Cache
CPU
  • Intel® Xeon® processor D-1518
  • FCBGA 1667
  • CPU TDP support 35W, 2.2GHz, 6MB, 4 Cores, 8 Threads
 
System Memory
Memory Capacity
  • 4x DDR4 DIMM sockets
  • Supports up to 128GB DDR4 ECC RDIMM
  • Supports up to 64GB DDR4 ECC/non-ECC UDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors
      (using ECC memory)
 
On-Board Devices
Chipset
  • System on Chip
SATA
  • SoC controller for 6 SATA3 (6Gbps) ports; RAID 0,1,5,10 RSTe
Network Controllers
  • Dual LAN via Intel® i350-AM2 Gigabit Ethernet
  • Dual LAN via SoC 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1 Realtek RTL8201N PHY (dedicated IPMI)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video
  • Aspeed AST2400
TPM
  • TPM header
 
Input / Output
SATA
  • 6 SATA3 (6Gbps) ports
LAN
  • 2 RJ45 10GBase-T ports
  • 2 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 ports (rear)
  • 4 USB 2.0 ports (via headers)
Video
  • 1 VGA port
Serial Port / Header
  • 1 COM port (header)
DOM
  • 1 SuperDOM (Disk on Module) power connector
Chassis (Optimized for X10SDV-4C-TLN4F)
1U Chassis:
  • SC505-203B
  • SC504-203B
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision N chassis is recommended. Please talk to your sales representative for details.

 
Expansion Slots
PCI-Express
  • 1 PCI-E 3.0 x16 slot
M.2
  • Interface: PCI-E 3.0 x4
  • Form Factor: M Key 2242/2280
  • Support SATA devices
 
System BIOS
BIOS Type
  • 128Mb SPI Flash with AMI BIOS
BIOS Features
  • PCI 3.0
  • ACPI 5.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
  • SMBIOS 2.8
  • UEFI 2.4
  • RTC (Real Time Clock) Wakeup
 
Management
Software
  • IPMI 2.0
  • KVM with dedicated LAN
  • NMI
  • SUM
  • SuperDocto 5
  • Watch Dog
Power Configurations
  • ACPI / APM Power Management
  • CPU Fan auto-off in sleep mode
  • Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, Chassis intrusion header, System level control
FAN
  • Total of four 4-pin fan headers supporting tachometer status monitoring
  • Dual Cooling Zone
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • 12V DC or ATX Power Source
  • RoHS
 
Operating Environment
Operating Temperature Range
  • 0°C - 60°C (32°F - 140°F)
Parts List (Bulk Package)
  Part Number Qty Description
Motherboard MBD-X10SDV-4C-TLN4F 1 X10SDV-4C-TLN4F Motherboard
I/O Cables CBL-0044L 2 57.5CM SATA FLAT S-S PBF
I/O Shield MCP-260-00084-0N 1 STD I/O SHIELD
Optional Parts List
  Part Number Qty Description
1U I/O Shield MCP-260-00085-0B 1 1U I/O Shield for X10SDV-F/TLN4F in CSE-510/505/504
1U I/O Shield MCP-260-00079-0N 1 1U I/O shield for X10SDV-F/TLN4F in SC813/SC512 chassis