| |
|
| Form Factor |
|
| Dimensions |
-
9.6" x 9.6" (24.38cm x 24.38cm)
|
| |
|
| CPU |
-
Intel® 6th Generation Core™ i3 series
- Intel® 6th Generation Core™ i5 series
- Intel® 6th Generation Core™ i7 series
- Intel® 7th Generation Core™ i3 series
- Intel® 7th Generation Core™ i5 series
- Intel® 7th Generation Core™ i7 series
- Intel® Celeron®
- Intel® Pentium®
- Socket H4 (LGA 1151) supported; QPI up to 5.0GT/s; CPU TDP support Up to 91W
|
| |
| Memory Capacity |
-
Up to 32GB Unbuffered non-ECC UDIMM, DDR4-2133MHz, in 2 DIMM slots
|
| Memory Type |
-
2133/1866/1600MHz Non-ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
|
| |
| Chipset |
|
| SATA |
-
Intel® H110 controller for 4 SATA3 (6 Gbps) ports;
- Intel RST
|
| Network Controllers |
-
Single LAN with Intel® PHY I219LM LAN controller
|
| Audio |
|
| Graphics |
|
| |
| USB |
- 6 USB 2.0 ports (2 rear, 4 via header)
- 4 USB 3.0 ports (2 rear, 2 via header)
|
| Video Output |
- 1 HDMI, 1 DP (DisplayPort), 1 DVI - D
- 1 Intel® HD Graphics
- 2 Independent Displays
|
| Serial Port / Header |
|
| TPM |
|
| Others |
- Force On mode by jumper and AC recovery
|
|
|
| PCI-E |
- 1 PCI-E 3.0 x16
- 1 PCI-E 2.0 x4
- 1 PCI-E 2.0 x1
- PCI-E 2.0 x4 with open slot
|
| |
| BIOS Type |
|
| BIOS Features |
-
Plug and Play (PnP)
- DMI 2.3
- USB Keyboard support
- Hardware BIOS Virus protection
- UEFI 2.3.1
- ACPI 5.0
- SMBIOS 3.0
- PCI 3.0
|
| |
| Software |
- NMI, SuperDoctor® 5, Watchdog
|
| Power Configurations |
- ACPI Power Management
- Keyboard Wakeup from Soft-Off
- Power-on mode for AC power recovery
- Force Power On by Jumpe
|
| |
| Voltage |
- +12V, +3.3V, +5V, +5V standby, 1.05 (PCH), 1.2V (VDIMM), 4 -fan status, Chassis intrusion header, Monitors CPU voltages, Supports system management utility, System level control, VBAT
|
| FAN |
- 4x 4-pin fan headers (up to 4 fans), Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, System level control, Thermal control tachometer fan connectors
|
| Temperature |
-
Monitoring for CPU and chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
-
CPU / System Overheat LED
- Standby alert LED
|
| Other Features |
- ACPI power management, ATX Power connector, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, RoHS, System level control, WOL
|
| |
| Operating Temperature Range |
-
0°C ~ 60°C (32°F ~ 140°F)
|
| Non-Operating Temperature Range |
-
-20°C ~ 60°C (-4°F ~ 140°F)
|
| Operating Relative Humidity Range |
-
10% ~ 85% (non-condensing)
|
| Non-Operating Relative Humidity Range |
-
10% ~ 95% (non-condensing)
|
|
.jpg)
