MBD-X9SPV-LN4F-3QE
-B |
- X9SPV-LN4F-3QE
(Bulk Pack)
|
|
Form Factor |
|
Dimensions |
- 6.75" x 6.75", (17.15cm x 17.15cm)
|
|
CPU |
- 3rd Generation Intel® Core i7 Mobile ECC processor
- Core i7-3612QE processor
|
|
Memory Capacity |
- 2x 204-pin DDR3 SODIMM sockets
- Supports up to 16 GB DDR3 ECC memory
|
Memory Type |
- 1333/1066MHz ECC DDR3 SO-DIMM, 204-pin gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
|
Chipset |
|
SATA |
- SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6Gb/s with RAID 0, 1
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers |
- Intel® 82574L Gigabit Ethernet controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
|
Graphics |
- Intel Integrated Graphics HD 4000 or Matrox G200eW to VGA via BIOS setup
|
|
SATA |
- 2x SATA 3.0 ports (6Gb/s)
- 4x SATA 2.0 ports (3Gb/s)
|
LAN |
- 4x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 4x USB 3.0 ports (via header)
- 6x USB 2.0 ports (4 rear, 2 via header)
|
VGA |
|
Serial Port / Header |
- 2x COM ports (1 rear, 1 header)
|
DOM |
- 1 DOM (Disk on Module) power connector
|
|
Please reference the OS Compatibility Chart for details |
|
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
Software |
- SuperDoctor® III
- Watch Dog
|
Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Keyboard Wakeup from Soft-Off
- Power-on mode for AC power recovery
|
|
Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
|
FAN |
- Total of four 4-pin fan headers supporting up to 4 fans
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
|
LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
|