| |
|
| Form Factor |
|
| Dimensions |
- 9.6" x 9.6", (24.4cm x 24.4 cm)
|
| |
|
| CPU |
-
Intel® 4th Gen Core i3/i5/i7, Pentium, Celeron processors
- Single Socket H3 (LGA 1150)
|
| |
| Memory Capacity |
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 non-ECC Un-Buffered memory (UDIMM)
|
| Memory Type |
- 1600MHz non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| |
| Chipset |
- Intel® Q87 Express Chipset
|
| SATA |
- SATA3 (6Gbps) w/ RAID 0, 1, 5, 10 via PCH with Intel RST
|
| Network Controllers |
- Intel® i217LM + Intel® i210AT Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Audio |
- RealTek ALC888S 7.1 High Definition Audio
|
| VGA |
|
| Super I/O |
|
| |
| Serial ATA |
- 6x SATA 3.0 ports (6Gbps) including 1x mSATA
|
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
|
| USB |
- 4x USB 3.0 ports (2 rear, 2 via header)
- 8x USB 2.0 ports (4 rear, 4 via headers)
|
| Audio |
- 7.1 HD Audio header and rear I/O
|
| Display |
- 1x VGA, 1x HDMI, 1x DVI-D, 1x Display port from Intel HD 4600 Graphics, 3x Independent Displays
|
| Serial Port / Header |
- 4x COM ports (headers); COM2 with RS422/485 support
|
| DOM |
- SATA DOM (Disk on Module) power connector support
|
| Security |
|
| Others |
- PS/2 connector for mouse and keyboard
|
|
|
|
| 3U Chassis |
- CSE-732D2-903B
- CSE-732D4-903B
|
| Mid-Tower |
- CSE-731D-300B
- CSE-731i-300B
- CSE-732D2-500B
- CSE-732D2-865B
- CSE-732D4-500B
- CSE-732D4-865B
- CSE-732D4F-500B
- CSE-732D4F-865B
- CSE-732D4F-903B
- CSE-732i-500B
- CSE-732i-865B
|
| Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
|
|
| PCI-Express |
- 1x PCI-E 3.0 x16 (in x16) slot
- 1x PCI-E 2.0 x4 slot
- 1x PCI-E 2.0 x1 slot
- 1x Mini-PCI-E w/ mSATA support
|
| |
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- DMI (SMBIOS) 2.7
- ACPI 5.0
- USB Keyboard support
|
| |
| Software |
- SuperDoctor® III
- Watch Dog
- AMT
- NMI
- vPro
|
| Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
| |
| Voltage |
- Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of four 4-pin fan headers supporting up to 4 fans
- 4x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Adaptive Thermal Monitor, PECI 3.0
|
| LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
• Please see our OS Compatibility Chart |
|
