|
Form Factor |
|
Dimensions |
- 6.7" x 6.7", (17cm x 17cm)
|
|
CPU |
- Intel® 4th Gen Core i7/i5/i3, Pentium, Celeron processors
- Single Socket H3 (LGA 1150)
|
|
Memory Capacity |
- 2x 204-pin DDR3 SODIMM sockets
- Supports up to 16 GB DDR3 non-ECC SODIMM
|
Memory Type |
- 1600MHz non-ECC DDR3 SDRAM 64-bit, 204-pin gold-plated SODIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
|
Chipset |
- Intel® H81 Express Chipset
|
SATA |
- Intel® H81 Express Chipset
|
USB |
- Intel® H81 Express Chipset
|
Network Controllers |
- Intel® i217 + Intel® i210AT Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
Audio |
- RealTek ALC888S 7.1 High Definition Audio
|
Graphics |
- Intel HD 4600 Graphics, Processor Graphic
|
Super I/O |
|
|
Serial ATA |
- 2x SATA 3.0 ports (6Gbps) including 1x mSATA
- 2x SATA 2.0 ports (3Gbps)
|
LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
|
USB |
- 2x USB 3.0 ports (rear)
- 5x USB 2.0 ports (2 rear, 2 via headers, 1 type A)
|
Audio |
- 7.1 HD Audio header and rear I/O (Mic-in/Line-in/Line-out)
|
Display |
- 1x Display Port, 1x HDMI, 1x DVI-I, 2x Independent Displays
|
Serial Port / Header |
- 5x COM ports (1x RS232/422/485, 4x RS232)
|
DOM |
- SATA DOM (Disk on Module) power connector support
|
Security |
|
|
|
Mini-ITX Chassis : |
|
Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards,
Revision M chassis is recommended. Please talk to your sales representative for details.
|
|
PCI-Express |
- x PCI-E 2.0 x16 slot
- 1x Mini-PCIe w/ mSATA support
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with UEFI BIOS
|
BIOS Features |
- DMI (SMBIOS) 2.7
- ACPI 5.0
- USB Keyboard support
|
|
Software |
- SuperDoctor® III
- Watch Dog
- NMI
|
Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Modem ring-on
|
|
Voltage |
- Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
FAN |
- Total of three 4-pin fan headers supporting up to 3 fans
- 3x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Adaptive Thermal Monitor, PECI 3.0
|
LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- 4-pin 12V DC input
|
|
- Please see our OS Compatibility Chart
|
|