|
Form Factor |
|
Dimensions |
- 6.7" x 6.7", (17cm x 17cm)
|
|
CPU |
-
Intel® 6th Gen Core i7/i5/i3 series, Intel® Celeron®, Intel® Pentium® processors; CPU TDP support up to 95W TDP
- Single Socket H4 (LGA 1151)
|
|
Memory Capacity |
- 2x 260-pin DDR4 SODIMM slots
- Up to 32GB DDR4
Non-ECC UDIMM
|
Memory Type |
- 2133/1866/1600MHz
Non-ECC DDR4 SDRAM 72-bit,
260-pin
gold-plated SODIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
|
Chipset |
- Intel® Q170 Express chipset
|
SATA |
- SATA3 (6Gbps) via Intel® Q170 Express controller
- RAID 0, 1, 5, 10
|
Network Controllers |
- Intel® PHY i219LM + Intel® i210AT Gigabit Ethernet LAN Controllers
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
Audio |
- RealTek ALC 888S High Definition Audio
|
|
SATA |
|
LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
|
USB |
- 6x USB 3.0 ports (4 rear + 2 via header)
- 5x USB 2.0 ports (4 via headers + 1 Type A)
|
Audio |
- Front panel header and 2 port jack
|
Video/Display |
- 1x HDMI, 1x DP (Display Port), 1x DVI-I, Intel® HD Graphics
- 3x Independent Displays
|
Serial Port / Header |
- 2x RS232 COM ports (2 rear)
|
SuperDOM |
- 1x SuperDOM (Disk on Module) ports with built-in power
|
TPM |
|
Others |
- SGPIO Header
- SMbus header
- 4x GPIO pins
|
|
Mid/Mini Tower Chassis: |
|
Mini-ITX Chassis: |
|
Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
|
|
|
PCI-Express |
- 1 PCI-E 3.0 x16 slot
- Mini-PCIe with mSATA support
- M.2 PCIe 3.0 x4 with SATA support, 2242/2280
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 3.0
- ACPI 5.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 3.0
- UEFI 2.3.1
- RTC (Real Time Clock) Wakeup
|
|
Software |
|
Power Configurations |
- ACPI Power Management
- Keyboard Wakeup from Soft-Off
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
|
Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
|
FAN |
- Total of 4 fan headers supporting up to 3 fans
- 3 fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
- Suspend static indicator LED
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- RoHS
- 12V DC Power Option
|
|
Operating Temperature Range |
- 0°C - 60°C (32°F - 140°F)
|
|