|
Form Factor |
|
Dimensions |
- 9.6" x 9.6", (24.4 cm x 24.4 cm)
|
|
CPU |
-
Intel® 6th Gen Core i7/i5/i3 series processors; CPU TDP support up to 115W TDP
- Single Socket H4 (LGA 1151)
|
|
Memory Capacity |
- 4x 288-pin DDR4 DIMM slots
- Supports up to 64GB DDR4 Non-ECC Un-Buffered memory (UDIMM) in 4 DIMM slots
|
Memory Type |
- Frequency up to 2133MHz non-ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
|
Chipset |
- Intel® H170 Express Chipset
|
SATA |
- SATA3 via PCH w/ RAID 0, 1, 5, 10
|
Network Controllers |
- Intel® i219V Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
Audio |
- RealTek ALC1150 High Definition Audio
|
|
Serial ATA |
|
LAN |
- 1x RJ45 Gigabit Ethernet LAN port
|
USB |
- 6x USB 3.0 ports (4 rear, 2 via headers)
- 4x USB 2.0 ports (2 rear, 2 via headers)
- 1x Thunderbolt AIC header
|
Audio |
|
Display |
- 1x DVI - D, 1x DP (Display Port), 1x HDMI
|
Serial Port / Header |
|
TPM |
|
|
|
PCI-Express |
- 1 PCI-E 3.0 x16 slot
- 1 PCI-E 3.0 x4 slot
- 1 PCI-E 3.0 x1 slot
- 1 PCIe M.2 (PCIe x4 2260/2280/22110)
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- DMI (SMBIOS) 2.7
- ACPI 5.0
- USB Keyboard support
|
|
Software |
|
Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
|
Voltage |
- Monitors for CPU Cores, +12V, +3.3V, +5V, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
FAN |
- Total of five 4-pin fan headers supporting up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|