MBD-X10QBL-4CT
-B |
- X10QBL-4CT
(for server SKU only)
|
|
Form Factor |
|
Dimensions |
- 16.79" x 16.4" (42.6cm x 41.7cm)
|
|
CPU |
- Intel® Xeon® processor
E7-8800 v4/v3, E7-4800 v4/v3
family
(up to 24 Cores and 165W TDP)
- Quad Socket R1 (LGA 2011)
|
Cache |
|
System Bus |
|
|
Memory Capacity |
- 32x 288-pin DDR4 DIMM slots
- Supports up to 4TB ECC 3DS LRDIMM or 2TB DDR4 ECC LRDIMM in 32 DIMM slots
|
Memory Type |
- 1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin gold-plated DIMMs
|
DIMM Sizes |
- 64GB, 32GB, 16GB, 8GB, 4GB
- 3DS LRDIMM: 128GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
|
|
Chipset |
|
SAS |
- SAS3 (12Gbps) via LSI® 3008 controller
- SW RAID 0, 1, 10 support
|
SATA |
- SATA2 (3Gbps) with RAID 0, 1, 5, 10
- SATA3 (6Gbps) with RAID 0, 1
- BBU option support, JBOD support (IT Mode)
|
Network Controllers |
- Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Video |
|
|
SAS |
|
SATA |
- 2x SATA3 (6Gbps) ports
- 4x SATA2 (3Gbps) ports
|
LAN |
- 2x RJ45 10GBase-T ports
- 1x dedicated LAN port for IPMI
|
USB |
- 6x USB 2.0 ports (3 rear, 2 via headers, 1 Type A)
|
Video |
|
Serial Port / Header |
- 2x COM ports (1 rear, 1 header)
|
TPM |
|
|
|
PCI-Express |
- 2x PCI-E 3.0 x16 (slot 1, 3)
- 2x PCI-E 3.0 x8 (slot 2, 4)
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
|
Software |
- IPMI (Intelligent Platform Management Interface) 2.0
- KVM with dedicated LAN
- SPM
- SUM
- SuperDoctor® 5
- Watch Dog
|
Power Configurations |
- ACPI Power Management
- Main Switch Override Mechanism
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
|
Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5 Phase-switching voltage regulator
|
FAN |
- 8x 4-pin fan headers
- 4x 9cm + 3x 8cm fans w/ speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
|