Home제품정보 MotherboardsMP Xeon®Socket 2011Intel C602 chipset

X10DBT-T

견적상담제품문의

Key Features
  1. Dual socket R1 (LGA 2011) supports Intel® Xeon® processor E7-2800 v2 / E7-4800 v2* / E7-8800 v2* family (15-Core), w/ QPI up to 8.0 GT/s
  2. Intel® C602 chipset
  3. Up to 2TB ECC DDR3 LRDIMM, speed up to 1600MHz; 32x DIMM slots
  4. 1x proprietary slot for PCI-E 3.0 x16 + x16 slot for Riser card support, 1x PCI-E 3.0 x8 MicroLP card
  5. Dual 10GBase-T ports - Intel® X540
  6. 2x SATA2 (3Gbps) support
  7. Integrated IPMI 2.0 and KVM with Dedicated LAN

Product SKUs
MBD-X10DBT-T-B
  • X10DBT-T-B (Bulk Pack)
Physical Stats
Dimensions
  • 18.83" x 13.68" (47.83cm x 34.75cm)
Processor/Cache
CPU
  • Intel® Xeon® processor E7-2800 v2 / E7-4800 v2* / E7-8800 v2* (up to 15 Cores and 155W)
  • Dual Socket R1 (LGA 2011)
Note † BIOS version 3.0 or above is required
Cache
  • Up to 37.5MB
System Bus
  • QPI up to 8 GT/s
System Memory
Memory Capacity
  • 32x 240-pin DDR3 DIMM slots
  • Up to 2TB DDR3 ECC LRDIMM
  • Up to 1TB DDR3 ECC Registered memory (RDIMM)
Memory Type
  • 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
  • LRDIMM 64GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • Intel® C602J chipset
SATA
  • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
  • SATA 3.0 6Gbps with RAID 0, 1
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® X540 Dual Port 10GBase-T Controller
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC
Input / Output
Storage
  • SAS/SATA: Through SXBP slot with BPN-ADP-8SATA3-1UBL-O-P & BPN-SAS3-227HD-N2
  • NVMe: Through NVMe slot with BPN-ADP-8PCIE3-1UBP
LAN
  • 2x RJ45 10GBase-T LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 2.0 ports total (2x rear)
VGA
  • 1x VGA port
Serial Port / Header
  • 1x Fast UART 16550 port / 1 Header
Chassis (Optimized for X10DBT-T )
2U Chassis
  • CSE-227HD-R1K28B
SuperServer(s) with X10DBT-T
Model(s)
  • SYS-2028UT-BTNRT
Expansion Slots
PCI-Express
  • 1x proprietary slot for PCI-E 3.0 x16 + x16 slot for Riser card support
Micro-LP
  • 1x PCI-E 3.0 x8 Micro-LP card(Low Profile)
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • BIOS resuce hot keys
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
Management
Software
  • SuperDoctor® III
  • Watch Dog
  • NMI
  • IPMI 1.5 / 2.0
Power Configurations
  • ACPI Power Management
  • Power-on mode for AC power recovery
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 6 Phase-switching voltage regulator
FAN
  • Eight 4-pin fan headers with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • RoHS
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Product SKU (Motherboard is for system only)
Part Number Qty Description
Motherboard MBD-X10DBT-T 1 X10DBT-T Motherboard, for system only