|
|
MBD-X11SCZ-F |
|
|
Form Factor |
|
Dimensions |
-
9.6" x 9.6" (24.38cm x 24.38cm)
|
|
CPU |
-
8th Generation Intel® Core™ i3 Processors, Intel® Celeron®, Intel® Pentium®, Intel® Xeon® E processor (Coffee Lake-S) Workstation.
- Single Socket H4 (LGA 1151) supported, CPU TDP support Up to 95W TDP
-
A graphic integrated CPU is required to have onboard video from the DVI and DP ports
|
|
Memory Capacity |
-
Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2666MHz, in 4 DIMM slots
|
Memory Type |
-
2666/2400/2133/1866/1600MHz ECC/Non-ECC DDR4 SDRAM 72-bit 288-pin UDIMM
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
-
Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
Chipset |
|
SATA |
-
Intel® C246 controller for 5 SATA3 (6 Gbps) ports; RAID 0,1,5,10
|
IPMI |
|
Network Controllers |
-
Single LAN with Intel® Ethernet Controller I210-AT
Single LAN with Intel® PHY I219LM LAN controller
|
Audio |
|
Graphics |
- Aspeed AST2500 BMC, Intel® HD Graphics
- 3 Independent Displays
|
|
LAN |
- 2 RJ45 Gigabit Ethernet LAN ports
|
USB |
- 7 USB 2.0 ports (6 headers + 1 Type A),
- 2 USB 3.0 ports (2 headers),
- 6 USB 3.1 ports (4 rears (3 Type A + 1 Type C) + 2 headers)
|
Video Output |
- 1 VGA D-Sub Connector port, 1 DVI - I port, 2 DP (DisplayPort) ports,
- 3 Independent Displays
|
Serial Port / Header |
|
TPM |
|
|
|
PCI-E |
-
1 PCI-E 3.0 x16,
- 2 PCI-E 3.0 x4 (in x8 slot)
|
M.2 |
- M.2 Interface: 1 SATA/PCI-E 3.0 x4
- Form Factor: 2280/22110
- Key: M-Key
|
|
Software |
- IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, SuperDoctor® 5, Watchdog
|
System Mangement Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
|
Power Configurations |
- +12V DC Power Input
- ATX Power connector
- ACPI Power Management
|
|
Voltage |
- +12V, +3.3V, +5V, +5V standby, 1.05 (PCH), 1.2V (VDIMM), 3.3V standby, 6 -fan status, Chassis intrusion header, Memory Voltages, Monitors CPU voltages, System temperature, VBAT
|
FAN |
- 6x 4-pin fan headers (up to 6 fans), 6 fans with tachometer status monitoring, Dual Cooling Zone, Fan speed control
|
Temperature |
-
Thermal Control for 6 Fan Connectors
|
LED |
|
Other Features |
-
12V DC or ATX Power Source, 8-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion header, Dual Cooling Zones, M.2 NGFF connector, RoHS, UID
|
|
Operating Temperature Range |
-
0°C ~ 60°C (32°F ~ 140°F)
|
Non-Operating Temperature Range |
-
-40°C - 85°C (-40°F - 185°F)
|
Operating Relative Humidity Range |
-
10% ~ 85% (non-condensing)
|
Non-Operating Relative Humidity Range |
-
5% - 95% (non-condensing)
|
|