|
Form Factor |
|
Dimensions |
-
8" x 13" (20.32cm x 33.02cm)
|
|
CPU |
-
Intel® 6th/7th Generation Core™ i3 series, Intel® Celeron®, Intel® Pentium®, Intel® Xeon® Processor E3-1200 v6/v5 series.
- Socket H4 (LGA 1151) supported, CPU TDP support 80W
|
Note |
-
BIOS version 2.0 or above is required to support 7th Generation Intel® Core™ i3 Processors and Intel® Xeon® Processor E3-1200 v6 series
|
|
Memory Capacity |
-
64GB Unbuffered ECC UDIMM, DDR4-2400MHz, in 4 DIMM slots
|
Memory Type |
-
2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
|
DIMM Sizes |
|
Memory Voltage |
|
Error Detection |
-
Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
Chipset |
|
SATA |
-
Intel® C236 controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10
|
IPMI |
|
Network Controllers |
-
Dual LAN with Intel® X540 10GBase-T Ethernet Controller
|
Graphics |
|
|
SATA |
|
LAN |
|
USB |
- 6 USB 2.0 ports (2 rear + 4 via header(s)),
- 5 USB 3.0 ports (2 rear + 2 via header(s) + 1 Type A)
|
Video Output |
|
Serial Port / Header |
- 2 COM Ports (1 rear, 1 header(s))
|
TPM |
|
|
|
PCI-E |
- 1 PCI-E 3.0 x16 Left Riser Slot
|
M.2 |
- Interface: PCIe 3.0 x4
- Form Factor: 2260, 2280, 22110
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
-
ACPI 1.0 / 2.0 / 3.0 / 4.0
- APM 1.2
- DMI 2.3
- Hardware BIOS Virus protection
- PCI 2.3
- Plug and Play (PnP)
- RTC (Real Time Clock) Wakeup
- SMBIOS 2.7.1
- UEFI 2.3.1
- USB Keyboard support
|
|
Software |
- Intel® Node Manager, IPMI2.0, NMI, SPM, SSM, SUM, SuperDoctor® 5, Watchdog
|
Power Configurations |
- ACPI Power Management
- Power-on mode for AC power recovery
|
|
Voltage |
- +12V, +3.3V, +5V, +5V standby, 6 -fan status, Chassis intrusion header, Monitors CPU voltages, Supports system management utility, System level control, VBAT
|
FAN |
- 6x 4-pin fan headers (up to 6 fans), Fan speed control, Overheat LED indication, Thermal control tachometer fan connectors
|
Temperature |
-
Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
-
UID/Remote UID
- CPU / System Overheat LED
|
Other Features |
-
Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, M.2 NGFF connector, VHD, WOL
|
|
Operating Temperature Range |
-
0°C ~ 50°C (32°F ~ 122°F)
|
Non-Operating Temperature Range |
-
-40°C - 70°C (-40°F - 158°F)
|
Operating Relative Humidity Range |
-
8% - 90% (non-condensing)
|
Non-Operating Relative Humidity Range |
-
5% - 95% (non-condensing)
|
|