| |
|
| Form Factor |
|
| Dimensions |
- 9.0" x 7.25", (22.86cm x 18.42cm)
|
| |
| CPU |
- Intel® Xeon® processor D-1518,
2.2GHz; CPU TDP support 35W
- FCBGA 1667
|
| Cores / Cache |
|
| |
| Memory Capacity |
- 4x DDR4 DIMM sockets
- Supports up to 128GB DDR4 ECC RDIMM
- Supports up to 64GB DDR4 ECC/non-ECC UDIMM
|
| Memory Type |
- 2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors
(using ECC memory)
|
| |
| Chipset |
|
| SATA |
- SoC controller for 4 SATA3 (6Gbps) ports; RAID 0,1,5,10 RSTe
|
| Network Controllers |
- Dual 10G SFP+ from D-1500 SoC
- Quad 1GbE with Intel I350-AM4
- Dual 1GbE with Intel I210
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
| Video |
|
| TPM |
|
| |
| SATA |
|
| LAN |
- 2x 10G SFP+ LAN ports
- 6x 1GbE LAN ports
- 1x Dedicated IPMI LAN port
|
| USB |
- 2x USB 3.0 ports (rear)
- 5x USB 2.0 ports
(4 via headers, 1 Type A)
|
| Video |
|
| Serial Port / Header |
|
| DOM |
- 2x SuperDOM (Disk on Module) power connectors
|
|
|
| 1U Chassis: |
-
SC504-203B
-
SC505-203B
-
SC813MTQ-350CB
-
SC514-505
-
SC515-R407
|
| Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards, Revision N chassis is recommended. Please talk to your sales representative for details.
|
|
|
| PCI-Express |
- 2x PCIe 3.0 x8 slots
- M.2 PCIe 3.0 x4, M Key 2242/2280/22110
- Mini-PCIe with mSATA support
|
| |
| BIOS Type |
- 128Mb SPI Flash with AMI BIOS
|
| BIOS Features |
- PCI 3.0
- ACPI 5.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.8
- UEFI 2.4
- RTC (Real Time Clock) Wakeup
|
| |
| Software |
- Intel® Node Manager
- IPMI 2.0
- KVM with dedicated LAN
- NMI
- SUM
- SuperDoctor® 5
- Watch Dog
|
| Power Configurations |
- ACPI Power Management
- ATX Power connector
- +12V DC Power Input
- Control of power-on for recovery from AC power loss
- CPU thermal trip support for processor protection
- M.2 NGFF connector, Node Manager Support, SDDC, System level control, UID, WOL
|
| |
| Voltage |
- Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, Chassis intrusion header, System level control, VBAT
|
| FAN |
- Total of six 4-pin fan headers supporting tachometer status monitoring
- Dual Cooling Zone
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- 12V DC or ATX Power Source
- RoHS
|
| |
|
| Operating Temperature Range |
- 0°C - 60°C (32°F - 140°F)
|
|
