| |
|
| Form Factor |
|
| Dimensions |
- 12" x 9.6", (30.48cm x 24.4 cm)
|
| |
|
| CPU |
-
Intel® Xeon® processor E3-1200 v3 and 4th Gen Core i3/i5/i7, Pentium, Celeron processors
- Single Socket H3 (LGA 1150)
|
| |
| Memory Capacity |
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 32GB DDR3 ECC/Non-ECC Un-Buffered memory (UDIMM)
|
| Memory Type |
- 1600MHz ECC/non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
| Chipset |
|
| SATA |
- SATA3 via PCH w/ RAID 0, 1, 5, 10
- SATA3 via ASM1061® w/ RAID 0, 1
|
| Network Controllers |
- Intel® i217LM + Intel® i210AT Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Audio |
- RealTek ALC1150 High Definition Audio
|
| |
| Serial ATA |
- 6x SATA3 (6Gbps) ports via PCH
- 2x SATA3 (6Gbps) ports via ASM1061®
- Total of 8x SATA3 ports (6Gbps)
|
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
|
| USB |
- 6x USB 3.0 ports (2 rear, 4 via headers)
- 10x USB 2.0 ports (4 rear, 6 via headers)
|
| Audio |
|
| Display |
- 1x VGA, 1x HDMI, 1x DVI, 1x Display port
|
| Serial Port / Header |
|
| DOM |
- SATA DOM (Disk on Module) power connector support
|
| Others |
- TPM header, 2x Type B 1394a headers, PS/2 connector for mouse and keyboard
|
|
|
|
| 3U Chassis |
|
| Mid-Tower |
- CSE-732D4-500B
- CSE-732D4-865B
- CSE-732G-903B
- CSE-733TQ-665B
|
| Tower / 4U Rackmount |
- CSE-743TQ-1200B-SQ
- CSE-743TQ-865B-SQ
- CSE-745TQ-800B
- CSE-745TQ-920B
|
| Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
|
|
| PCI-Express |
- 2x PCI-E 3.0 x16 slots -
Function as: 16/NA or 8/8
- 3x PCI-E 2.0 x1 (in x4) slots
|
| PCI |
|
| |
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- DMI (SMBIOS) 2.7
- ACPI 5.0
- USB Keyboard support
|
| |
| Software |
- SuperDoctor® III
- Watch Dog
- AMT
- vPro
|
| Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
| |
| Voltage |
- Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of five 4-pin fan headers supporting up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
