| |
|
| Form Factor |
ATX |
| Dimensions |
12" x 9.6", (30.48cm x 24.4 cm)
|
| |
| CPU |
-
Intel® Xeon® processor E3-1200 & v2 series, Intel® 2nd Gen and 3rd Gen Core i3, Intel® Pentium® and Celeron processors
*** *
- Socket H2 (LGA 1155)
|
| |
| Memory Capacity |
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
| Memory Type |
- 1333/1600MHz*** ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
| Chipset |
|
| SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® 82574L, 4x Gigabit LAN ports
- Virtual Machine Device Queues High efficient I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| VGA |
- BMC integrated Matrox G200
|
| Super I/O |
|
| |
| Serial ATA |
- 6x SATA ports total (4x 3Gb, 2x 6Gb)
|
| LAN |
- 4x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 8x USB 2.0 ports total
(2x rear + 6x via header)
|
| VGA |
|
| Serial Port / Header |
- 2x Fast UART 16550 serial port
(one header and one rear port)
|
| DOM |
- 1x DOM (Disk on Module) power connector
|
| TPM |
|
|
|
|
| 1U Chassis |
- CSE-113MTQ-560CB
- href="/products/chassis/1U/113/SC113MTQ-563C.cfm">CSE-113MTQ-563CB
- href="/products/chassis/1U/113/SC113MTQ-R400C.cfm ">CSE-113MTQ-R400CB
- href="/products/chassis/1U/811/SC811T-250.cfm">CSE-811T-250
- CSE-811T-260
- CSE-811T-300
- href="/products/chassis/1U/811/SC811T-350.cfm">CSE-811T-350
- CSE-811T-410
- CSE-811T-420
- href="/products/chassis/1U/811/SC811T-420-INF.cfm ">CSE-811T-420-INF
- CSE-811T-520
- CSE-811TQ-260
- CSE-811TQ-280
- href="/products/chassis/1U/811/SC811TQ-350.cfm">CSE-811TQ-350B
- CSE-811TQ-520B
- CSE-811TQ-600B
|
| Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
|
| |
|
| PCI-Express |
- 1 (x16) PCI-E 3.0 slot***
- 1 PCI 32-bit slot
|
| |
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
| Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
| |
| Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
• Please see our OS Compatibility Chart |
|
x9sca2.917.zip
