Key Features
  1. Single socket H2 (LGA 1155) supports Intel Xeon E3-1200 & E3-1200 v2 series, 2nd and 3rd Gen Core i3 processors***, Pentium, Celeron
  2. Intel C204 PCH Chipset
  3. Up to 32GB DDR3 ECC 1333MHz / 1600MHz*** UDIMMs in 4 sockets
  4. Intel 82574L Dual port GbE LAN
  5. 4x SATA2 3Gb/s w/ RAID 0, 1, 5, 10; 2x SATA3 6Gb/s w/ RAID 0, 1
  6. 2x (x8) PCI-E 3.0*** slots, 2x (x4) PCI-E 2.0 in x8 slots
  7. 9x USB 2.0 ports (2 rear + 6 via header + 1 Type-A)
  8. Integrated IPMI 2.0 with KVM and Dedicated LAN

RoHS

Product SKUs
MBD-X9SCM-iiF -B
  • X9SCM-iiF (Bulk Pack)
 
Physical Stats
Form Factor
  • Micro ATX
  • Dimensions
  • 9.6" x 9.6", (24.4cm x 24.4 cm)
  •  
    Processor/Cache
    CPU
    • Intel® Xeon® processor E3-1200 & v2 series, Intel® 2nd Gen and 3rd Gen Core i3, Intel® Pentium® and Celeron processors *** *
    • Socket H2 (LGA 1155)
     
    System Memory
    Memory Capacity
    • 4x 240-pin DDR3 DIMM sockets
    • Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
    Memory Type
    • 1333/1600MHz*** ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
    DIMM Sizes
    • 8GB, 4GB, 2GB, 1GB
    Memory Voltage
    • 1.5 V
    Error Detection
    • Corrects single-bit errors
    • Detects double-bit errors (using ECC memory)
     
    On-Board Devices
    Chipset
    • Intel® C204 PCH chipset
    SATA
    • 4x SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
    • 2x SATA3 (6Gbps) w/ RAID 0, 1
    IPMI
    • Support for Intelligent Platform Management Interface v.2.0
    • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
    • Nuvoton WPCM450 BMC
    Network Controllers
    • Intel® 82574L, 2x Gigabit LAN ports
    • Virtual Machine Device Queues High efficient I/O overhead
    • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    • 1x Realtek RTL8201N PHY (dedicated IPMI)
    VGA
    • BMC integrated Matrox G200
    Super I/O
    • Nuvoton NCT6776F
     
    Input / Output
    Serial ATA
    • 6 SATA ports
    • 6 SATA hard drives supported
    LAN
    • 2x RJ45 LAN ports
    • 1x RJ45 Dedicated IPMI LAN port
    USB
    • 9x USB 2.0 ports total
      (2x rear + 6x via header + 1x type A)
    VGA
    • 1x VGA port
    Serial Port / Header
    • 2x Fast UART 16550 serial port
      (one header and one rear port)
    DOM
    • 1x DOM (Disk on Module) power connector
    TPM
    • 1x TPM 1.2 20-pin Header
     
    OS Compatibility

    • Please see our OS Compatibility Chart
     
    Chassis ( Optimized for X9SCM-iiF )
    1U Chassis
    • href="/products/chassis/1U/113/SC113MTQ-330C.cfm ">CSE-113MTQ-330CB
    • CSE-512F-350B
    • href="/products/chassis/1U/512/SC512F-441.cfm ">CSE-512F-441B
    • CSE-811TQ-R441B
    • CSE-813MTQ-350C
    • CSE-813MTQ-441CB
    • CSE-813MTQ-R400CB
    Important Chassis Notes
    • To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
     
    Expansion Slots
    PCI-Express
    • 2 (x8) PCI-E 3.0 in x8 slots***
    • 2 (x4) PCI-E 2.0 in x8 slots
     
    System BIOS
    BIOS Type
    • 64Mb SPI Flash EEPROM with AMI BIOS
    BIOS Features
    • DMI 2.3
    • PCI 2.3
    • ACPI 1.0 / 2.0
    • USB Keyboard support
    • SMBIOS 2.3
     
    Management
    Software
    • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
    • SuperDoctor® III
    • Watch Dog
    • NMI
    • Intel Node Manager Support
    Power Configurations
    • ACPI / ACPM Power Management
    • Main Switch Override Mechanism
    • Power-on mode for AC power recovery
    • Internal/External modem ring-on
     
    PC Health Monitoring
    Voltage
    • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
    • 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
    FAN
    • Total of 5 fan headers supporting up to 5 fans
    • Five 4-pin fan headers
    • 5x fans with tachometer status monitoring
    • Status monitor for speed control
    • Status monitor for on/off control
    • Support 3-pin fans (w/o speed control)
    • Low noise fan speed control
    • Pulse Width Modulated (PWM) fan connectors
    Temperature
    • Monitoring for CPU and chassis environment
    • CPU thermal trip support
    • FC temperature sensing logic
    • Thermal Monitor 2 (TM2) support
    • PECI
    LED
    • CPU / System Overheat LED
    • +5V Standby alert LED
    Other Features
    • Chassis intrusion detection
    • Chassis intrusion header
    Parts List (Bulk Package)
      Part Number Qty Description
    X9SCM-iiF MBD-X9SCM-iiF 1 X9SCM-iiF Motherboard
    I/O Cables CBL-0044L 2 57.5CM SATA FLAT S-S PBF
    I/O Shield MCP-260-00027-0N 1 STD I/O SHIELD