|
| MBD-X8SIL-F
-O |
- X8SIL-F
(Standard Retail Pack)
|
| MBD-X8SIL-F
-B |
|
| |
| Form Factor |
|
| Dimensions |
- 9.6" x 9.6" (24.4cm x 24.4cm)
|
| |
| CPU |
- LGA 1156 Socket
- Intel® Xeon® X3400
series
- Intel® Xeon® L3400
series
- Intel® Core™ i3
- Intel® Pentium® G6950
- Intel® Celeron® G1101
|
| |
| Memory Capacity |
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Registered memory (RDIMM)
- Supports up to 16 GB DDR3 ECC Un-Buffered memory (UDIMM)
- 1333 / 1066 / 800 MHz
- Dual Core processors of Ci3 and Pentium: support ECC UDIMM only
- Note: Supports 1-Gb and 2-Gb x8 devices only - Intel 3420 / 3400 Chipset Memory Requirements
|
| Note |
- All X3400 series and L3426 CPU support RDIMM and UDIMM
- All i3 series, L3406, G6950, and G1101 CPU support UDIMM only
|
| Memory Type |
- 1333 / 1066 / 800 MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
| Chipset |
|
| SATA |
- 6x SATA (3 Gbps)
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- 2x Intel® 82574L Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| VGA |
|
| Super I/O |
|
| Clock Generator |
|
| |
| Serial ATA |
- 6 SATA ports
- 6 SATA hard drives supported
|
| LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 2x USB rear ports
- 1x USB on-board
- 2x USB internal header (4 ports)
- Total 7 USB 2.0 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1x Fast UART 16550 serial port
- 1x internal header
|
| |
|
RoHS
|
- RoHS Compliant 6/6, Pb Free
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| |
• Please see this board's I/O Panel |
| |
• Please see our OS Compatibility Chart |
|
|
| 1U Chassis |
- CSE-111T-560CB
- CSE-510-200B
- CSE-510L-200B
- CSE-510T-200B
- CSE-512-200B
- CSE-512F-280B
- CSE-512F-350B
- CSE-512F-520B
- CSE-811i-280
- CSE-811i-520
- CSE-811T-410
- CSE-811T-420
- CSE-811TQ-280
- CSE-811TQ-520B
- CSE-813MTQ-280C
- CSE-813MTQ-520C
|
| 2U Chassis |
- CSE-213A-R900LPB
- CSE-216A-R900LPB
- CSE-216E1-R900LPB
- CSE-216E2-R900LPB
- CSE-822T-400LPB
- CSE-823MTQ-R700LPB
- CSE-823TQ-650LPB
- CSE-825MTQ-R700LPB
- CSE-825TQ-560LPB
- CSE-825TQ-R700LPB
- CSE-826A-R1200LPB
- CSE-826E1-R800LPB
- CSE-826E2-R800LP
- CSE-826TQ-R800LPB
|
| 3U Chassis |
- CSE-833T-550B
- CSE-833T-650B
- CSE-833T-R760B
- CSE-835TQ-R800B
- CSE-836A-R1200B
- CSE-836E1-R800B
- CSE-836E2-R800B
- CSE-836TQ-R800B
- CSE-933E1-R760B
- CSE-933E2-R760B
- CSE-933T-R760B
- CSE-936A-R1200B
- CSE-936A-R900B
- CSE-936E1-R900
|
| Mid-Tower |
- CSE-731D-300B
- CSE-731i-300B
- CSE-733TQ-465B
- CSE-733TQ-645
- CSE-733TQ-665B
|
| Tower / 4U Rackmount |
- CSE-743T-645
- CSE-743T-650
- CSE-743T-665B
- CSE-743T-R760
- CSE-743TQ-865B
- CSE-743TQ-865B-SQ
- CSE-743TQ-R760
- CSE-745TQ-800B
- CSE-745TQ-R800B
- CSE-846A-R1200B
- CSE-846E1-R900B
- CSE-846E2-R900
- CSE-846TQ-R900B
|
| Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
|
| |
| PCI-Express |
- 2 (x8) PCI-E 2.0 slot
- 1 (x4) PCI-E (using x8 slot)
|
| PCI |
|
| |
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
| Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
| |
| Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
|
• Please see our OS Compatibility Chart |
|
x8sil1.819.zip
