Key Features
  1. Single socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 and E5-1600 v3 family
  2. Intel® C612 chipset
  3. Up to 512GB ECC DDR4 2133MHz LRDIMM; 8x DIMM slots
  4. 7x PCI-E slots total: 2 PCI-E 3.0 x8, 2 PCI-E 3.0 x8 (in x16), 2 PCI-E 3.0 x4 (in x8) or 1 x8 + 1 x0 (auto-switch), & 1 PCI-E 2.0 x4 (in x8)
  5. Intel® i210 Dual port GbE LAN
  6. 10x SATA3 (6Gbps) via C612
  7. 1x VGA, 2x COM, 1x TPM
  8. 4x USB 3.0 ports, 8x USB 2.0 ports
  9. 2x SuperDOM with built-in power

Global SKUs

Product SKUs
MBD-X10SRL-F-B
  • X10SRL-F-B (Bulk Pack)
Physical Stats
Form Factor
  • ATX
Dimensions
  • 12" x 9.6", (30.5cm x 24.4cm)
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600/1600 v3 family (up to 145W TDP **)
  • Single Socket R3 (LGA 2011)
Core / Cache
  • Up to 18 Cores / Up to 45MB Cache
Note ** Motherboard supports this maximum TDP.
Please verify your system can thermally support
System Memory
Memory Capacity
  • 8x 288-pin DDR4 DIMM slots
  • Up to 512GB DDR4 ECC LRDIMM
  • Up to 256GB DDR4 ECC RDIMM
Memory Type
  • 2133/1866/1600/1333MHz ECC DDR4
    SDRAM 72-bit, 288-pin (RDIMM/LRDIMM) /
    284-pin gold-plated DIMMs
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • Intel C612 Express chipset
SATA
  • SATA3 (6Gbps) via C612 controller
  • RAID 0, 1, 5, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® i210 Dual Port Gigabit Ethernet
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio
  • ASPEED AST2400 BMC
Input / Output
SATA
  • 10x SATA3 (6Gbps) ports
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 4x USB 3.0 ports (2 rear + 1 via header + 1 Type A)
  • 8x USB 2.0 ports (2 rear + 6 via header)
Video
  • 1x VGA port
Serial Port / Header
  • 1x serial port, 1x header
SuperDOM
  • 2x SuperDOM (Disk on Module) ports with built-in power
TPM
  • 1x TPM 1.2 20-pin Header
OS Compatibility
  • Please reference the OS Compatibility Chart for details
Chassis (Optimized for X10SRL-F )
1U Chassis:
  • SC813MFTQ-441CB
  • SC813MFTQ-R400CB
  • SC813MFTQ-R606CB
  • SC813MFTQ-R606CB
2U Chassis:
  • SC213LT-600LPB
  • SC823TQ-653LPB
  • SC825TQ-R720LPB
  • SC826TQ-R500LPB
3U Chassis:
  • SC833T-653B
  • SC836BE1C-R1K03B
Mid/Mini Tower Chassis:
  • SC732D4F-903B
  • SC732I-500B
4U / Tower Chassis:
  • SC743T-665B
  • SC842i-500B
  • SC842TQ-665B
  • SC842TQ-865B
Important Chassis Notes
  • To support the new generation Intel®
    Xeon® processor-based motherboards,
    Revision K chassis is recommended.
    Please talk to your sales representative for details.
Expansion Slots
PCI-Express
  • 2x PCI-E 3.0 x8 (in x16) slots
  • 2x PCI-E 3.0 x8 slots
  • 2x PCI-E 3.0 x4 (in x8) slots
    Auto-switch to 1 x8 and 1 x0
  • 1x PCI-E 2.0 x4 (in x8) slot
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
  • SMBIOS 2.7.1
  • UEFI 2.3.1
  • RTC (Real Time Clock) Wakeup
Management
Software
  • Intel® Node Manager
  • IPMI 2.0 with KVM support
  • SuperDoctor® 5
  • Watch Dog
  • NMI
  • SPM
  • SUM
Power Configurations
  • ACPI Power Management
  • Keyboard Wakeup from Soft-Off
  • CPU Fan auto-off in sleep mode
  • Power-on mode for AC power recovery
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +3.3V, +5V, +12V,
    +5V Standby, VBAT, HT, Memory, Chipset Voltages.
FAN
  • Total of 6 fan headers supporting up to 6 fans
  • 6 fans with tachometer status monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • Chipkill support
  • RoHS, Halogen Free
Product SKU (Motherboard is for system only)
Part Number Qty Description
Motherboard MBD-X10SRL-F 1 X10SRL-F Motherboard
I/O Cables CBL-0044L 2 X10SRA Motherboard
I/O Shield MCP-260-00042-0N 1 STD I/O shield for X9 socket R server MB with Gasket