4U Dual Xeon Quad GPU w/ 4 PCI-E 2.0 (x16) Solution ServerBoard / Workstation

Key Features
  1. Intel Xeon processor 5600/5500 series, with QPI up to 6.4 GT/s
  2. Dual Intel 5520 (Tylersburg) Chipset
  3. Up to 192GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM
  4. Dual Intel 82574L Gigabit Ethernet Controllers
  5. 6x SATA (3 Gbps) Ports via ICH10R Controller
  6. 4 (x16) PCI-E 2.0, 2 (x4) PCI-E 2.0 (in x16 and x8 slots), 1 (x4) PCI-E (in x16 slot), 2 32-bit PCI slots
  7. Integrated Matrox G200eW Graphics
  8. Realtek ALC883 7.1 HD Audio
  9. Integrated IPMI 2.0 with Dedicated LAN

RoHS

Product SKUs
MBD-X8DTG-QF -B
  • X8DTG-QF (Server Only)
 
Physical Stats
Form Factor
  • Proprietary
Dimensions
  • 15.2" x 13 " (38.61cm x 33.02cm)
 
Processor/Cache
CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Intel®
      Xeon®Processor 5600 Series (Westmere)
    • Intel®
      Xeon®Processor 5500 Series (Nehalem-EP)
QPI
  • up to 6.4 GT/s
 
System Memory
Memory Capacity
  • 12x 240-pin DIMM sockets
  • Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage
  • 1.5 V / 1.35V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Intel® 5520 (Tylersburg) chipset
  • ICH10R + 2x IOH-36D
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support (Windows)
  • RAID 0, 1, 10 support (Linux)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • 2x Intel® 82574L Gigabit Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Audio
  • Realtek ALC883 7.1 HD audio
Graphics
  • Matrox G200eW 16MB DDR2
Super I/O
  • Winbond 83827HG chip
 
Input / Output
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 6x USB rear ports
  • 4x USB internal headers
  • Total 10 USB 2.0 Compliant
Audio
  • Realtek ALC883 7.1 HD audio
  • 1x S/PDIF digital output
VGA
  • 1x VGA Port
Serial Port
  • 1x Serial Port
 
OS Compatibility

• Please see our OS Compatibility Chart
 
Chassis ( Optimized for X8DTG-QF )
Tower / 4U Rackmount
  • CSE-747TQ-R1400B
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
 
Expansion Slots
PCI-Express
  • 4 (x16) PCI-E 2.0
  • 2 (x4) PCI-E 2.0
  • 1 (x4) PCI-E (in x16 slot)
PCI
  • 2x 32-bit 33MHz PCI slots
 
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
 
Management
Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • SuperDoctor® III
Power Configurations
  • ACPI / ACPM Power Management
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
  • 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
  • Total of eight fan headers supporting up to 8 fans
  • Eight 4-pin fan headers
  • 8x fans with tachometer status monitoring
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 8x fan connectors
  • PECI
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
 
Operating Environment / Compliance
RoHS

RoHS 6/6
  • RoHS Compliant 6/6, Pb Free
Environmental Spec.
  • Operating Temperature: 10° to 35° C (50° to 95°F)
  • Non-operating Temperature: -40° to 70° C (-40° to 158° F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
Parts List
  Part Number Qty Description
X8DTG-QF MBD-X8DTG-QF-O 1 X8DTG-QF Motherboard