| |
| Form Factor |
|
| Dimensions |
- 19.8" x 9.2" (50.29cm x 23.37cm)
|
| |
| CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel®
Xeon® Processor X5600/E5600/L5600 Series
(Westmere) 40W - 130W
- Intel®
Xeon® Processor X5500/E5500/L5500 Series
(Nehalem-EP) 38W - 95W
|
| QPI |
|
| |
| Memory Capacity |
- 6x 240-pin DIMM sockets
- Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Memory Mirroring supported
|
| Memory Type |
- 1333 / 1066 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 1GB, 2GB, 4GB
, 8GB
, 16GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
| Chipset |
- Dual Intel® 5520 (Tylersburg) chipset + PLX 8647 + ICH10R
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- Intel® 82576 Dual-port Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| Super I/O |
|
| Clock Generator |
|
| |
| Serial ATA |
- 6 Serial ATA ports
- 6 SATA hard drives supported
|
| LAN |
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
|
| Serial Port |
|
| Video |
|
|
|
| 1U Chassis |
|
| 2U Chassis |
- CSE-218G-R1800B
- CSE-218XGQ-R1800B
|
| |
| PCI-Express |
- 4 (x16) PCI-E 2.0 slots, full-height full-length (support GPU cards)
- 2 (x8) PCI-E 2.0 (in x16) slots and 2 (x4) PCI-E 1.0 slots via riser cards
|
| |
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
| Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
|
| Power Configurations |
- ACPI / ACPM Power Management
|
| |
| Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of 12 fan headers supporting up to 12 fans
- 12 4-pin fan headers
- 12 fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for 12 fan connectors
- PECI
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
|
RoHS
|
- RoHS Compliant 6/6, Pb Free
|
| Environmental Spec. |
- Operating Temperature: 10° to 35° C (50° to 95°F)
- Non-operating Temperature: -40° to 70° C (-40° to 158° F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
