6 Gbps SAS 2.0, 4 PCI-E 2.0 Xeon Tylersburg ServerBoard

Key Features
  1. Intel Xeon processor 5600/5500 series, with QPI up to 6.4 GT/s
  2. Intel 5520 (Tylersburg) Chipset
  3. Up to 192GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM
  4. Dual Intel 82574L Gigabit Ethernet Controller
  5. 6x SATA2 (3 Gbps) Ports via ICH10R Controller
  6. 3 (x8) PCI-E 2.0, 1 (x4) PCI-E 2.0 and 1 (x4) PCI-E slot
  7. Integrated Matrox G200eW Graphics
  8. LSI 2008 8-Port 6Gbps SAS Controller; RAID 0, 1, 10; RAID 5 optional

RoHS

Product SKUs
MBD-X8DT6 -O
  • X8DT6 (Standard Retail Pack)
MBD-X8DT6 -B
  • X8DT6 (Bulk Pack)
 
Physical Stats
Form Factor
  • Extended ATX
Dimensions
  • 12" x 13" (30.5cm x 33cm)
 
Processor/Cache
CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Intel®
      Xeon®Processor 5600 Series (Westmere)
    • Intel®
      Xeon®Processor 5500 Series (Nehalem-EP)
QPI
  • up to 6.4 GT/s
 
System Memory
Memory Capacity
  • 12x 240-pin DIMM sockets
  • Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage
  • 1.5 V / 1.35V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Intel® 5520 (Tylersburg) chipset
  • ICH10R + IOH-36D
SAS
    • LSI 6Gbps SAS 2008
    • RAID 0, 1, 10 support
    • (Optional: AOC-SAS2-RAID5-KEY) RAID 5 support
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support (Windows)
  • RAID 0, 1, 10 support (Linux)
Network Controllers
  • 2x Intel® 82574L Gigabit Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics
  • Matrox G200eW 16 MB DDR2
Super I/O
  • Winbond 83827HF chip
 
Input / Output
SAS
  • 8x 6Gbps SAS / SATA ports
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
Floppy
  • 1 Floppy controller; 1.44 MB
LAN
  • 2x RJ45 LAN ports
USB
  • 4x USB rear ports
  • 2x USB on-board (TypeA)
  • 4x USB internal headers
  • Total 8 USB 2.0 Compliant
VGA
  • 1x VGA Port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header (Option)
 
Chassis ( Optimized for X8DT6 )
1U Chassis
  • CSE-815TQ-560CB
2U Chassis
  • CSE-216A-R900LPB
  • CSE-216E1-R900LPB
  • CSE-823TQ-650LPB
  • CSE-825TQ-560LPB
  • CSE-825TQ-563LPB
  • CSE-825TQ-R700LPB
  • CSE-826A-R1200LPB
  • CSE-826E1-R800LPB
  • CSE-826E2-R800LP
  • CSE-826TQ-R800LPB
3U Chassis
  • CSE-833T-550B
  • CSE-833T-650B
  • CSE-833T-R760B
  • CSE-835TQ-R800B
  • CSE-835TQ-R920B
  • CSE-836A-R1200B
  • CSE-836E1-R800B
  • CSE-836E2-R800B
  • CSE-836TQ-R800B
  • CSE-933E1-R760B
  • CSE-933E2-R760B
  • CSE-933T-R760B
  • CSE-936A-R1200B
  • CSE-936A-R900B
  • CSE-936E1-R900
Tower / 4U Rackmount
  • CSE-743i-R760
  • CSE-743T-665B
  • CSE-743T-R760
  • CSE-743TQ-865B
  • CSE-743TQ-865B-SQ
  • CSE-743TQ-R760
  • CSE-745TQ-800B
  • CSE-745TQ-R800B
  • CSE-846A-R1200B
  • CSE-846E1-R900B
  • CSE-846E2-R900
  • CSE-846TQ-R900B
  • CSE-847A-R1400LPB
  • CSE-847E1-R1400LPB
  • CSE-847E16-R1400LPB
  • CSE-847E2-R1400LPB
  • CSE-847E26-R1400LPB
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
 
Expansion Slots
PCI-Express
  • 3 (x8) PCI-E 2.0 slots
  • 1 (x4) PCI-E 2.0 slot
  • 1 (x4) PCI-E slot
 
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
 
Management
Software
  • SuperDoctor® III
Power Configurations
  • ACPI / ACPM Power Management
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
  • 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
  • Total of eight fan headers supporting up to 8 fans
  • Eight 4-pin fan headers
  • 8x fans with tachometer status monitoring
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 8x fan connectors
  • PECI
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
 
Operating Environment / Compliance
RoHS

RoHS 6/6
  • RoHS Compliant 6/6, Pb Free
Environmental Spec.
  • Operating Temperature: 10° to 35° C (50° to 95°F)
  • Non-operating Temperature: -40° to 70° C (-40° to 158° F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
 
OS Compatibility

• Please see our OS Compatibility Chart
Parts List
  Part Number Qty Description
X8DT6 MBD-X8DT6-O 1 X8DT6 Motherboard
I/O Cable 1 CBL-0044L 4 57.5CM SATA FLAT S-S PBF
I/O Cable 2 CBL-0083L 1 15.7" USB 2.0 2-PORT W/KEY
I/O Cable 3 CBL-0097L-02 2 79536-3220,50CM IPASS TO 4 SATA,PB FREE
I/O Cable 4 CBL-010L 1 9 PIN SERIAL PORT DTK CABLE, LF
I/O Cable 5 CBL-022L 1 ATX FLOPPY CABLE 3 HEADERS PB FREE
I/O Shield MCP-260-00027-0N 1 STD I/O SHIELD FOR X8, H8, X7SB3 SERVER MB (3RD LAN + 4XLAN)
Manual MNL-1112-QRG 1 X8DTE/X8DT6/X8DTE-F/X8DT6-F QUICK REFERENCE GUIDE