Key Features
  1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
  2. Intel® C612 chipset
  3. Up to 1TB ECC DDR4 2133MHz; 16x DIMM slots
  4. 2x PCI-E 3.0 x16, 4x PCI-E 3.0 x8, and 1x PCI-E 3.0 x4 (in x8) slot
  5. Quad 1GbE LAN ports via Intel® i350
  6. 10x SATA3 (6Gbps) ports w/ Intel C612 controller
  7. 8x SAS3 (12Gbps) ports w/ LSI 3008 SW controller; RAID 0, 1, 10 support, JBOD support (IT Mode)
  8. Integrated IPMI 2.0 and KVM with Dedicated LAN
  9. 5x USB 3.0 and 4x USB 2.0 ports

Product SKUs
MBD-X10DRH-CLN4 -O
  • X10DRH-CLN4 (Retail Pack)
MBD-X10DRH-CLN4 -B
  • X10DRH-CLN4 (Bulk Pack)
 
Physical Stats
Form Factor
  • E-ATX
Dimensions
  • 12" x 13" (30.5cm x 33.2cm)
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP)
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
 
System Memory
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
 
On-Board Devices
Chipset
  • Intel® C612 chipset
AHCI SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
SCU SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
SAS
  • LSI 3008 SAS3 (12Gbps) controller;
    SW RAID 0, 1, 10
  • JBOD support (IT Mode)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® i350 Quad Gigabit Ethernet LAN
  • Virtual Machine Device Queues reduce I/O overhead
Video
  • ASPEED AST2400 BMC
 
Input / Output
SATA
  • 10x SATA3 (6Gbps) ports
SAS
  • 8x SAS3 (12Gbps) ports
LAN
  • 4x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 5x USB 3.0 ports (2 rear + 2 via header + 1 Type A)
  • 4x USB 2.0 ports (4 via headers)
Video
  • 1x VGA Connector
Serial Port / Header
  • 1x Fast UART 16550 serial
  • 2x COM Ports (1 rear, 1 header)
DOM
  • 2x Super DOM (Disk on Module) ports
TPM
  • 1x TPM 1.2 20-pin Header
Chassis (Optimized for X10DRH-CLN4 )
2U Chassis:
  • SC826BE1C-R920LPB
  • SC826BE2C-R920LPB
  • SC826BAC4-R920LPB
  • SC216BE1C-R920LPB
  • SC216BE2C-R920LPB
3U Chassis:
  • SC836BE1C-R1K03B
  • SC836BE2C-R1K03B
  • SC835TQ-R920B
Mid/Mini Tower Chassis:
  • SC732D4F-903B
  • SC732i-865B
4U / Tower Chassis:
  • SC743TQ-1200B
  • SC847BE1C-R1K28LPB
  • SC847BE2C-R1K28LPB
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.

 
Expansion Slots
PCI-Express
  • 2x PCI-E 3.0 x16
  • 4x PCI-E 3.0 x8
  • 1x PCI-E 3.0 x4 (in x8)
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
 
Management
Software
  • Intel® Node Manager 3.0
  • IPMI 2.0
  • NMI
  • SPM
  • SSM
  • SUM
  • SuperDoctor® III
  • SuperDoctor® 5
  • Watch Dog
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 6 Phase-switching voltage regulator
FAN
  • 8x 4-pin fan headers (up to 8 fans)
  • 8x fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
  • RoHS
 
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Parts List (Bulk)
  Part Number Qty Description
X10DRH-CLN4 MBD-X10DRH-CLN4 1 X10DRH-CLN4 Motherboard
I/O Cables CBL-0044L 2 SATA CABLE 61CM FLAT S-S PBF
I/O Shield MCP-260-00042-0N 1 STD I/O shield for X9 socket R server MB with Gasket

Parts List (Single)
  Part Number Qty Description
X10DRH-CLN4 MBD-X10DRH-CLN4 1 X10DRH-CLN4 Motherboard
I/O Cables CBL-0044L 2 SATA CABLE 61CM FLAT S-S PBF
I/O Cables CBL-SAST-0532 2 Internal Mini-SAS HD to Mini-SAS HD 50cm,30AWG,12Gb/s,HF,RoHS/REACH,PBF
I/O Shield MCP-260-00042-0N 1 STD I/O shield for X9 socket R server MB with Gasket
Optional Parts List
  Part Number Qty Description
Heat Sink
(optional, not included)
- - CPU Heat Sink reference
TPM security module
(optional, not included)
AOM-TPM-9655V
AOM-TPM-9655H
- TPM module with Infineon 9655, RoHS/REACH,PBF;
Vertical or Horizontal depends on the server
SuperDOM - - Supermicro SATA DOM Solutions