MBD-X10DRL-C -O |
- X10DRL-C (Standard Retail Pack)
|
MBD-X10DRL-C -B |
|
|
Form Factor |
|
Dimensions |
- 12" x 10" (30.48cm x 25.4cm)
|
|
CPU |
- Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP **)
- Dual Socket R3 (LGA 2011)
|
Cores / Cache |
- Up to 18 Cores / Up to 45MB Cache
|
System Bus |
|
Note |
- ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
|
|
Memory Capacity |
- 8x 288-pin DDR4 DIMM slots
- Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
|
Memory Type |
- 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes |
- RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
|
|
Chipset |
- Intel® C612 Express chipset
|
AHCI SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
SCU SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
SAS |
- LSI 3108 SAS3 (12Gbps) controller; 2GB cache; HW RAID 0, 1, 5, 6, 10, 50, 60
- Supports up to 16 devices as default, more HDD devices support is also available as an option *
For special SKU, please contact your Supermicro Sales.
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers |
- Intel® i210 Gigabit Ethernet controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
Video |
|
|
SAS |
|
SATA |
- 6x SATA3 (6Gbps) ports
- I-SATA 4 and I-SATA 5 support SATA DOM
|
LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 4x USB 3.0 ports (2 rear + 2 via header)
- 3x USB 2.0 ports (2 via header + 1 Type A)
|
Video |
|
Serial Port / Header |
|
DOM |
- 2x SuperDOM (Disk on Module) ports
- 1x SATA DOM power connector
|
TPM |
|
|
|
PCI-Express |
- 1x PCI-E 3.0 x16
- 2x PCI-E 3.0 x8
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- PCI 2.3
- ACPI 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
|
Software |
- IPMI 2.0
- SPM
- SUM
- SuperDoctor® 5
- Intel® Node Manager 3.0
- Watch Dog
|
Power Configurations |
- ACPI Power Management
- Power-on mode for AC power recovery
|
|
Voltage |
- Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, Memory Voltages.
- 5 Phase-switching voltage regulator
|
FAN |
- 8x 4-pin fan headers (up to 8 fans)
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- RoHS, Halogen Free
- Dual Cooling Zones
|
|
Operating Temperature Range |
- 10°C - 35°C (50°F - 95°F)
|
Non-Operating Temperature Range |
- -40°C - 70°C (-40°F - 158°F)
|
Operating Relative Humidity Range |
- 8% - 90% (non-condensing)
|
Non-Operating Relative Humidity Range |
- 5% - 95% (non-condensing)
|
|