Key Features
  1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4†/ v3 family; QPI up to 9.6GT/s
  2. Intel® C612 chipset
  3. Up to 1TB† ECC 3DS LRDIMM , up to DDR4- 2400†MHz ; 8x DIMM slots
  4. 3 PCI-E 3.0 x8, 1 PCI-E 3.0 x4 (in x8), 1 PCI-E 3.0 x16, 1 PCI-E 2.0 x4 (in x8)
  5. Intel® i210 GbE LAN, 2 ports
  6. Integrated IPMI 2.0 and KVM with Dedicated LAN
  7. 10x SATA3 (6Gbps); RAID 0, 1, 5, 10
  8. 4x USB 3.0 (2 rear, 2 via header) 5x USB 2.0 (2 rear, 2 via header, 1 Type A)

Global SKUs

Product SKUs
MBD-X10DRL-i -O
  • X10DRL-i (Standard Retail Pack)
MBD-X10DRL-i -B
  • X10DRL-i (Bulk Pack)
Physical Stats
Form Factor
  • ATX
Dimensions
  • 12" x 10" (30.48cm x 25.4cm)
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v4+ / v3 family (up to 145W TDP **)
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 22 Cores† / Up to 55MB† Cache
System Bus
  • QPI up to 9.6 GT/s
Note
  • ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
System Memory
Memory Capacity
  • 8x 288-pin DDR4 DIMM slots
  • Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
Memory Type
  • 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel® C612 Express chipset
AHCI SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
SCU SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® i210 Gigabit Ethernet controller
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8211E PHY (dedicated IPMI)
Video
  • ASPEED AST2400 BMC
Input / Output
SATA
  • 10x SATA3 (6Gbps) ports
SAS
  • 8x SAS3 (12Gbps) ports
  • SuperCap option support
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 4x USB 3.0 ports (2 rear + 2 via header)
  • 5x USB 2.0 ports (2 rear + 2 via header + 1 Type A)
Video
  • 1x VGA port
Serial Port / Header
  • 2x Fast UART 16550 port / 1 Header
DOM
  • DOM (Disk on Module) power connector
TPM
  • 1x TPM 1.2 20-pin Header
Chassis (Optimized for X10DRL-i)
1U Chassis:
  • SC813MFTQ-441CB
  • SC813MFTQ-R400CB
  • SC813MFTQ-R606CB
  • SC813MFTQ-R606CB
2U Chassis:
  • SC213LT-600LPB
  • SC823TQ-653LPB
  • SC826TQ-R500LPB
3U Chassis:
  • SC833T-653B
Mid/Mini Tower Chassis:
  • SC732D4F-903B
  • SC732I-500B
4U / Tower Chassis:
  • SC842TQ-665B
  • SC842TQ-865B
Important Chassis Notes
  • To support the new generation Intel®
    Xeon® processor-based motherboards,
    Revision M chassis is recommended.
    Please talk to your sales representative for details.
SuperServer(s) with X10DRL-i
Model(s)
  • SYS-6018R-MT
  • SYS-6018R-MTR
Expansion Slots
PCI-Express
  • 3 PCI-E 3.0 x8
  • 1 PCI-E 3.0 x16
  • 1 PCI-E 3.0 x4 (in x8)
  • 1 PCI-E 2.0 x4 (in x8)
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.3
  • ACPI 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Management
Software
  • SuperDoctor® 5
  • Intel® Node Manager 3.0
  • Watch Dog
  • IPMI 2.0
Power Configurations
  • ACPI Power Management
  • Power-on mode for AC power recovery
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, Memory Voltages.
  • 5 Phase-switching voltage regulator
FAN
  • 8x 4-pin fan headers (up to 8 fans)
  • 8x fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
  • RoHS
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Parts List (Bulk)
Part Number Qty Description
X10DRL-i MBD-X10DRL-i 1 X10DRL-i Motherboard
I/O Cables CBL-0044L 6 SATA CABLE 61CM FLAT S-S PBF
I/O Shield MCP-260-00042-0N 1 STD I/O shield for socket R server MB with Gasket
Optional Parts List
  Part Number Qty Description
Heat Sink
(optional, not included)
- - CPU Heat Sink reference
TPM security module
(optional, not included)
AOM-TPM-9655V or
AOM-TPM-9655H
- TPM module with Infineon 9655, RoHS/REACH,PBF;
Vertical or Horizontal depends on the server
SuperDOM - - Supermicro SATA DOM Solutions [Details]