|
| MBD-X10DRC-T4+ -B |
|
| MBD-X10DRC-T4+ -P |
|
| |
| Form Factor |
|
| Dimensions |
- 13.68" x 13" (34.74cm x 33cm)
|
| |
| CPU |
- Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP **)
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 18 Cores / Up to 45MB Cache
|
| System Bus |
|
| Note |
- ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
|
| |
| Memory Capacity |
- 24x 288-pin DDR4 DIMM slots
- Up to 1.5TB ECC LRDIMM, 768GB ECC RDIMM
|
| Memory Type |
- 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
| Chipset |
- Intel® C612 Express chipset
|
| SAS |
- LSI 3108 SAS3 (12Gbps) controller; HW RAID 0, 1, 5, 6, 10, 50, 60
- 2GB Cache with optional SuperCap backup module
- Supports up to 16 devices as default, more HDD devices support is also available as an option *
For special SKU, please contact your Supermicro Sales.
|
| AHCI SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
| SCU SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Intel® X540 Quad Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
| Video |
- ASPEED AST2400 BMC
- Video resolution up to 1920x1200 @ 60Hz 32BPP
|
| |
| SATA |
|
| SAS |
- 8x SAS3 (12Gbps) ports
- SuperCap option support
|
| LAN |
- 4x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 3x USB 3.0 ports (2 rear + 1 Type A)
|
| Video |
|
| Serial Port / Header |
- 2x Fast UART 16550 serial
- 2x COM Ports (1 rear, 1 header)
|
| DOM |
- 2x SuperDOM (Disk on Module) ports
|
| TPM |
|
|
|
|
| 2U Chassis: |
|
| 3U Chassis: |
- SC835BTQ-R1K28B
- SC836BE1C-R920B
|
| 4U / Tower Chassis: |
- SC745TQ-R920B
- SC847BE1C-R1K28LPB
|
| Important Chassis Notes |
- To support the new generation Intel®
Xeon® processor-based motherboards,
Revision M chassis is recommended.
Please talk to your sales representative for details.
|
| |
|
| Model(s) |
- SYS-2028R-C1RT4+
- SYS-7048R-C1RT4+
|
| |
|
| PCI-Express |
- 2 PCI-E 3.0 x16
- 3 PCI-E 3.0 x8
- 1 PCI-E 2.0 x4 (in x8)
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
|
| Software |
- Intel® Node Manager 3.0
- NMI
- SPM
- SUM
- SuperDoctor® 5
- Watch Dog
|
| Power Configurations |
- ACPI Power Management
- Power-on mode for AC power recovery
|
| |
|
| Voltage |
- Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, +3.3V Standby, VBAT, Memory Voltages.
- 6 Phase-switching voltage regulator
|
| FAN |
- 8x 4-pin fan headers (up to 8 fans)
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
|
| |
|
| Operating Temperature Range |
- 10°C - 35°C (50°F - 95°F)
|
| Non-Operating Temperature Range |
- -40°C - 70°C (-40°F - 158°F)
|
| Operating Relative Humidity Range |
- 8% - 90% (non-condensing)
|
| Non-Operating Relative Humidity Range |
- 5% - 95% (non-condensing)
|
|
