Home제품정보 MotherboardsDP Xeon®Socket 2011Intel C602J Chipset

X9DRW-iTPF+

견적상담제품문의

Key Features
  1. Dual socket R (LGA 2011) supports Intel Xeon processor E5-2600
  2. Intel C602J chipset; QPI up to 8.0GT/s
  3. Up to 768GB DDR3 1600MHz* ECC Registered DIMM; 24x DIMM sockets * Depends on memory configuration
  4. Riser card support: Left side - 1 (x32) PCI-E 3.0 Right side - 1 (x16) PCI-E 3.0
  5. Intel 82599 Dual port 10G SFP+ & Intel i350 Dual port GbE controllers
  6. 4x SATA2 and 2x SATA3 ports
  7. Integrated IPMI 2.0 and KVM with Dedicated LAN
  8. 7x USB 2.0 ports (2 rear, 4 via header + 1 Type A)

RoHS

Product SKUs
MBD-X9DRW-iTPF+ -B
  • X9DRW-iTPF+ (Bulk Pack)
 
Physical Stats
Form Factor
  • Proprietary WIO
Dimensions
  • 12.8" x 16.5" (32.5cm x 41.9cm)
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 (up to 135W TDP **)
  • Dual Socket R (LGA 2011)
Cache
  • Up to 20MB
System Bus
  • QPI up to 8 GT/s
** Motherboard supports this maximum TDP. Please verify your system can thermally support.
 
System Memory
Memory Capacity
  • 24x 240-pin DDR3 DIMM sockets
  • Supports up to 768 GB DDR3 ECC Registered memory (RDIMM) in 24 DIMM sockets
  • Supports up to 128 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM) in 24 DIMM sockets
Memory Type
  • 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C602J chipset
SATA
  • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
  • SATA 3.0 6Gbps with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® 82599 Dual Port 10G SFP+
  • Intel® i350 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10G SFP+, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Video
  • G200 (Nuvoton WPCM450 BMC w/ graphic controller)
 
Input / Output
SATA
  • 2 SATA 3.0 ports (6Gbps)
  • 4 SATA 2.0 ports (3Gbps)
LAN
  • 2 SFP+ 10GbE LAN ports
  • 2 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 7 USB 2.0 ports total
    (2 rear + 4 via header + 1 Type A)
Video
  • 1 VGA port
Keyboard/Mouse
  • 1 Combo Keyboard/Mouse PS/2 port
Serial Port / Header
  • 1 Fast UART 16550 port / 1 Header
TPM
  • 1 TPM 1.2 20-pin Header
 
Chassis ( Optimized for X9DRW-iTPF+ )
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
  • Please order the optional I/O shield (2 LAN + 2TG) separately.
 
Expansion Slots
PCI-Express
  • Left hand riser: 1 PCI-E 3.0 (x32)
  • Right hand riser: 1 PCI-E 3.0 (x16)
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI
 
Management
Software
  • SuperDoctor® III
  • Watch Dog
  • NMI
  • Optional IPMI 1.5 / 2.0
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 5+1 Phase-switching voltage regulator
FAN
  • 6x 4-pin fan headers (up to 6 fans)
  • 6x fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 6x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
  • RoHS
 
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Parts List (retail)
Part Number Qty Description
X9DRW-iTPF+ MBD-X9DRW-iTPF+ 1 X9DRW-iTPF+ Motherboard
I/O Shield MCP-260-00038-0N - 1U/2U UIO/WIO I/O Shield (2 LAN+ 2 TG)
I/O Cables CBL-0044L 2 SATA CABLE 61CM FLAT S-S PBF
I/O Cables CBL-0097L-03 2 30AWG 50CM Ipass to 4 SATA, W/50cm SB, S
Heat Sink
(optional, not included)		 - - CPU Heat Sink reference
TPM security module
(optional, not included)		 AOC-TPM-V20-IFN - IFX TPM Krypton Lite Board Module Rev.1U, SLB9635TT1.2FW3.19 (for 20pin TPM header).