MBD-X9DRL-7F-O |
- X9DRL-7F (Standard Retail Pack)
|
MBD-X9DRL-7F-B |
|
|
Form Factor |
|
Dimensions |
- 12" x 10" (30.48cm x 25.4cm)
|
|
CPU |
- Intel® Xeon® processor E5-2600 (up to 130W TDP **)
- Dual Socket R (LGA 2011)
|
Cache |
|
System Bus |
|
|
** Motherboard supports this maximum TDP. Please verify your system can thermally support |
|
Memory Capacity |
- 8x 240-pin DDR3 DIMM sockets
- Supports up to 256 GB DDR3 ECC Registered memory (RDIMM)
- Supports up to 64 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
|
Memory Type |
- 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- Support ECC and non-ECC UDIMMs
|
DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
Chipset |
|
SATA |
- SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6Gb/s with RAID 0, 1, 10
|
SAS |
- SAS2 (6Gb/s) via LSI 2208
- HW RAID 0, 1, 10 support
- Supports up to 16 devices
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers |
- Intel® i210 Gigabit Ethernet
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
|
Video |
|
|
SATA |
- 2 SATA 3.0 ports (6Gb/s)
- 4 SATA 2.0 ports (3Gb/s)
|
SAS |
|
LAN |
- 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
- 7 USB 2.0 ports total
(4 rear + 2 via header + 1 Type A)
|
Video |
|
Serial Port / Header |
- Total of 2 COM ports: 1 rear, 1 via header
|
DOM |
- 1 DOM (Disk on Module) power connector
|
TPM |
|
|
|
1U Chassis |
- CSE-813MFTQ-R400CB
- CSE-813MTQ-400CB
- CSE-813MTQ-R400CB
|
Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
|
|
PCI-Express |
- 2 PCI-E 3.0 x8
- 1 PCI-E 2.0 x4 (in x8)
- 1 PCI-E 2.0 x1
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI
|
|
Software |
- SuperDoctor® III
- Watch Dog
- IPMI 2.0
|
Power Configurations |
- ACPI / APM Power Management
- Power-on mode for AC power recovery
|
|
Voltage |
- Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
- PCH cores (1.1V and 1.5V)
|
FAN |
- 6x 4-pin fan headers with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 6x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- RoHS, Halogen Free
- Dual Cooling Zones
|
|
Operating Temperature Range |
- 10°C - 35°C (50°F - 95°F)
|
Non-Operating Temperature Range |
- -40°C - 70°C (-40°F - 158°F)
|
Operating Relative Humidity Range |
- 8% - 90% (non-condensing)
|
Non-Operating Relative Humidity Range |
- 5% - 95% (non-condensing)
|
|