Home제품정보 MotherboardsDP Xeon®Socket 2011Intel C602 Chipset

X9DAX-iTF

견적상담제품문의

Key Features
  • Support Hyper-Speed
  1. Dual socket R (LGA 2011) supports Intel Xeon processor E5-2600
  2. Intel C602 chipset; QPI up to 8.0GT/s
  3. Up to 512GB DDR3 1600MHz ECC Registered DIMM; 16x DIMM sockets
  4. 2 PCI-E 3.0 x16, 3 PCI-E 3.0 x8, 1 UIO PCI-E 3.0 x8 (for SMC UIO HBA) or 1 PCI-E 2.0 x4 (in x8)
  5. Intel X540 Dual port 10GBase-T
  6. 8x SATA2 and 2x SATA3 ports
  7. Integrated IPMI 2.0 and KVM with Dedicated LAN
  8. Dual port front and rear USB 3.0
  9. Performance boost with Hyper-Speed

RoHS

Product SKUs
MBD-X9DAX-iTF-O
  • X9DAX-iTF (Standard Retail Pack)
MBD-X9DAX-iTF -B
  • X9DAX-iTF (Bulk Pack)
 
Physical Stats
Form Factor
  • Enhanced Extended ATX
Dimensions
  • 13.68" x 13" (34.74cm x 33cm)
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 (up to 150W TDP **)
  • Dual Socket R (LGA 2011)
Cache
  • Up to 20MB
System Bus
  • QPI up to 8 GT/s
** Motherboard supports this maximum TDP. Please verify your system can thermally support
 
System Memory
Memory Capacity
  • 16x 240-pin DDR3 DIMM sockets
  • Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
  • Supports up to 128 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C602 chipset
AHCI SATA
  • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
  • SATA 3.0 6Gbps with RAID 0, 1, 5, 10
SCU SATA
  • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® X540 Dual Port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Video
  • Matrox G200eW
Audio
  • RealTek ALC889 7.1 High Definition Audio with S/PDIF header
 
Input / Output
AHCI SATA
  • 2x SATA 3.0 ports (6Gbps)
  • 4x SATA 2.0 ports (3Gbps)
SCU SATA
  • 4x SATA 2.0 ports (3Gbps)
LAN
  • 2 RJ45 10GbE LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 4 USB 3.0 ports (2 rear + 2 via header)
  • 7 USB 2.0 ports total
    (4 rear + 2 via header + 1 Type A)
Audio
  • Line-in / Line-out / Microphone Ports
Serial Port / Header
  • 1 Fast UART 16550 Header
IEEE 1394a
  • 2 Headers
DOM
  • 1 DOM (Disk on Module) power connector
TPM
  • 1 TPM 1.2 20-pin Header
 
Chassis ( Optimized for X9DAX-iTF )
2U Chassis
  • CSE-829BTQ-R1K28LPB
Tower / 4U Rackmount
  • CSE-747TG-R1620-SQ
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
 
Expansion Slots
PCI-Express
  • 2x PCI-E 3.0 x16
  • 3x PCI-E 3.0 x8
  • 1x UIO PCI-E 3.0 x8 (for SMC UIO HBA) or 1x PCI-E 2.0 x4 (in x8)

    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI
 
Management
Software
  • SuperDoctor® III
  • Watch Dog
  • NMI
  • IPMI 1.5 / 2.0
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 6+1 Phase-switching voltage regulator
FAN
  • 8x 4-pin fan headers (up to 8 fans)
  • 8x fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • RoHS, Halogen Free
 
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Parts List (retail)
Part Number Qty Description
X9DAX-iTF MBD-X9DAX-iTF 1 X9DAX-iTF Motherboard
I/O Cables CBL-0044L 6 SATA CABLE 61CM FLAT S-S PBF
I/O Cables CBL-0173L 1 INTERNAL TO EXTERNAL FOR 1394 CONNECTOR,PBF
Heat Sink
(optional, not included)		 - - CPU Heat Sink reference
TPM security module
(optional, not included)		 AOC-TPM-V20-IFN - IFX TPM Krypton Lite Board Module Rev.1U, SLB9635TT1.2FW3.19 (for 20pin TPM header).