| |
|
| Form Factor |
|
| Dimensions |
- 8.54" x 18.72" (21.7cm x 47.5cm)
|
| |
| CPU |
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 130W TDP **)
- Dual Socket R (LGA 2011)
|
| Cache |
|
| System Bus |
|
| Note |
† BIOS version 3.0 or above is required |
| Note |
** Motherboard supports this maximum TDP. Please verify your system can thermally support |
| |
| Memory Capacity |
- 16x 240-pin DDR3 DIMM slots
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC RDIMM
- Up to 128GB DDR3 ECC/non-ECC UDIMM
|
| Memory Type |
- 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- Support ECC and non-ECC UDIMMs
* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed. |
| DIMM Sizes |
-
32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
64GB LRDIMM |
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
| Chipset |
|
| AHCI SATA |
- SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
|
| SAS |
- SAS2 (6Gb/s) via LSI 2308
- SW RAID 0, 1, 10 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
|
| Video |
|
| |
| AHCI SATA |
- 2 SATA 3.0 ports (6Gb/s)
- 4 SATA 2.0 ports (3Gb/s)
|
| SAS |
|
| LAN |
- 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 3 USB 2.0 ports (2 rear + 1 Type A)
|
| Video |
|
| DOM |
- 1 DOM (Disk on Module) power connector
|
| TPM |
|
|
|
| 1U Chassis |
|
| Tower / 4U Rackmount |
- CSE-F414IS-R1K62B
- CSE-F424AG-R1K62B
- CSE-F424BG-R1K62B
|
|
Important Chassis Notes
|
- This motherboard is designed only for FatTwin™ chassis
|
|
|
| Model(s) |
-
SYS-6017R-73HDP+
-
SYS-F627G3-F73+
-
SYS-F627G2-F73+
-
SYS-F617H6-FTL+
-
SYS-F647G2-F73+
|
| |
|
| PCI-Express |
- 1 PCI-E 3.0 x16 slot (requires riser card)
- 2 PCI-E 3.0 x8 slots
- 1 PCI-E 2.0 x4 (in x8) slot
- Riser card support: PCI-E 3.0 x32 (rear)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
|
| |
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
| Software |
- SuperDoctor® III
- Watch Dog
- NMI
- IPMI 1.5 / 2.0
|
| Power Configurations |
- ACPI / APM Power Management
- Power-on mode for AC power recovery
|
| |
| Voltage |
- Monitors for CPU Cores, +1.1V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
| FAN |
- 8x 4-pin fan headers
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- Suspend Static indicator LED
- UID/Remote UID
|
| Other Features |
|
| |
|
| Operating Temperature Range |
- 10°C - 35°C (50°F - 95°F)
|
| Non-Operating Temperature Range |
- -40°C - 70°C (-40°F - 158°F)
|
| Operating Relative Humidity Range |
- 8% - 90% (non-condensing)
|
| Non-Operating Relative Humidity Range |
- 5% - 95% (non-condensing)
|
|
