|
| MBD-X9DRD-iT+-O |
- X9DRD-iT+ (Standard Retail Pack)
|
| MBD-X9DRD-iT+-B |
|
| |
| Form Factor |
|
| Dimensions |
- 13.68" x 13" (34.74cm x 33cm)
|
| |
| CPU |
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 135W TDP **)
- Dual Socket R (LGA 2011)
|
| Note |
† BIOS version 3.0 or above is required |
| Note |
** Motherboard supports this maximum TDP.
Please verify your system can thermally support. |
| Cache |
|
| System Bus |
|
| |
| Memory Capacity |
- 24x 240-pin DDR3 DIMM slots
- Up to 1.5TB DDR3 ECC LRDIMM
- Up to 768GB DDR3 ECC RDIMM
- Up to 128GB DDR3 ECC/non-ECC UDIMM
|
| Memory Type |
- 1866/1600/1333/1066/800MHz* ECC
DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- Support ECC and non-ECC UDIMMs
* Maximum memory speed may be capped
by CPU. Please verify that the chosen
CPU can support desired memory speed.
|
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
| Chipset |
|
| AHCI SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1, 5, 10
|
| SCU SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform
Management Interface v.2.0
- IPMI 2.0 with virtual media over
LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX,
and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
|
| Video |
|
| |
| SATA |
- 2x SATA3 (6Gbps) ports
- 8x SATA2 (3Gbps) ports
|
| LAN |
- 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 7x USB 2.0 ports total
(4 rear + 2 via header + 1 Type A)
|
| Video |
|
| Serial Port / Header |
- 1x Fast UART 16550 serial;
1 COM port (rear)
|
| DOM |
- 2x SATA DOM (Disk on Module) ports
|
| TPM |
|
|
|
| |
|
| 1U Chassis |
|
| Important Chassis Notes |
- To support the new generation Intel®
Xeon® processor-based motherboards,
Revision M chassis is recommended.
Please talk to your sales representative
for details.
|
| |
|
| Model(s) |
- SYS-6017R-TDT+
- SYS-6027R-TDT+
|
| |
|
| PCI-Express |
- 1x PCI-E 3.0 x32 left riser slot
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- BIOS rescue hot keys
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
|
| Software |
- Intel® Node Manager
- IPMI 2.0
- NMI
- SuperDoctor® 5
- Watch Dog
|
| Power Configurations |
- ACPI / APM Power Management
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
| |
|
| FAN |
- Monitors for CPU Cores, +1.8V, +3.3V,
+5V, +12V, +5V Standby, VBAT, 4 Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
| FAN |
- 6x 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
|
| |
|
| Operating Temperature Range |
- 10°C - 35°C (50°F - 95°F)
|
| Non-Operating Temperature Range |
- -40°C - 70°C (-40°F - 158°F)
|
| Operating Relative Humidity Range |
- 8% - 90% (non-condensing)
|
| Non-Operating Relative Humidity Range |
- 5% - 95% (non-condensing)
|
|
