Home제품정보 MotherboardsDP Xeon®Socket 2011Intel C602 Chipset

X9DRD-CNT+

견적상담제품문의

Key Features
  1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 family†
  2. Intel® C602 chipset; QPI up to 8.0GT/s
  3. Up to 1.5TB ECC DDR3, up to 1866MHz; 24x DIMM slots
  4. 1x PCI-E 3.0 x32 left riser slot or 1x PCI-E 3.0 x16 (in x16) slot
  5. Intel® X540 Dual port 10GBase-T
  6. 8x SATA2 and 2x SATA3 ports
  7. 8x SAS3 (12Gbps) ports via LSI 3108 HW RAID 0, 1, 5, 6, 10, 50, 60; Supercap option support
  8. Integrated IPMI 2.0 and KVM with Dedicated LAN
  9. 7x USB 2.0 ports (4 rear, 2 via header, 1 Type A)

Product SKUs
MBD-X9DRD-CNT+ -O
  • X9DRD-CNT+ (Standard Retail Pack)
MBD-X9DRD-CNT+ -B
  • X9DRD-CNT+ (Bulk Pack)
 
Physical Stats
Form Factor
  • Enhanced Extended ATX
Dimensions
  • 13.68" x 13" (34.74cm x 33cm)
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 135W TDP **)
  • Dual Socket R (LGA 2011)
Note
  • † BIOS version 3.0 or above is required
Cache
  • Up to 30MB
System Bus
  • QPI up to 8 GT/s
** Motherboard supports this maximum TDP. Please verify your system can thermally support.
 
System Memory
Memory Capacity
  • 24x 240-pin DDR3 DIMM slots
  • Up to 1.5TB DDR3 ECC LRDIMM
  • Up to 768GB DDR3 ECC RDIMM
  • Up to 384GB DDR3 ECC/non-ECC UDIMM
Memory Type
  • 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs
  • * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C602 chipset
AHCI SATA
  • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
  • SATA 3.0 6Gbps with RAID 0, 1, 5, 10
SCU SATA
  • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SAS
  • LSI 3108 8 port SAS3
  • HW RAID 0, 1, 5, 6, 10, 50, 60 support w/ supercap option
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® X540 Dual Port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201F PHY (dedicated IPMI)
Video
  • Matrox G200eW
Input / Output
SAS
  • 8x SAS3 (12Gbps) ports
SATA
  • 2x SATA3 (6Gbps) ports
  • 8x SATA2 (3Gbps) ports
NVMe
  • 4x Internal NVMe ports
LAN
  • 2x RJ45 10GBase-T ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 7x USB 2.0 ports total (4 rear + 2 via header + 1 Type A)
Video
  • 1x VGA port
Serial Port / Header
  • 1x Fast UART 16550 serial; 1 COM port (rear)
SATA DOM
  • 1x SATA DOM (Disk on Module) ports
TPM
  • 1x TPM 1.2 20-pin Header
 
SuperServer(s) with X9DRD-CNT+
Model(s)
  • SYS-6027R-CDNRT+
 
Expansion Slots
PCI-Express
  • 1x PCI-E 3.0 x32 left riser slot
  • 1x PCI-E 3.0 x16 right riser slot
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • BIOS rescue hot keys
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
 
Management
Software
  • Intel® Node Manager
  • IPMI 2.0
  • NMI
  • SuperDoctor® 5
  • Watch Dog
Power Configurations
  • ACPI / APM Power Management
  • CPU Fan auto-off in sleep mode
  • Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +5V Standby, VBAT, 4 Memory Voltages.
  • 5+1 Phase-switching voltage regulator
FAN
  • 6x 4-pin fan headers
  • 6x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
  • RoHS
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Parts List (retail)
Part Number Qty Description
X9DRD-CNT+ MBD-X9DRD-CNT+ 1 X9DRD-CNT+ Motherboard
I/O Cables CBL-0044L 6 SATA CABLE 61CM FLAT S-S PBF
I/O Shield MCP-260-00042-0N 1 STD I/O shield for X9 socket R server MB with Gasket.
Optional Parts List
Part Number Qty Description
Heat Sink
(optional, not included)		 - - CPU Heat Sink reference
TPM security module
(optional, not included)		 AOM-TPM-9655V or
AOM-TPM-9655H		 - TPM module with Infineon 9655, RoHS/REACH,PBF;
Vertical or Horizontal depends on the server
Supercap BTR-TFM8G-LSICVM02 - Supercap
Supercap Bracket MCP-240-00127-0N - SuperCap bracket, include screw, same size as 2.5" HDD