Integrated Board

X11DPH-T

Available Colors : Black

Key Features
  • Corporate Database
  • Database Processing & Storage
  • Enterprise Server
  • HPC, Data Center
  • iSCSI SAN
  1. Dual Socket P (LGA 3647) support 2nd Gen. Intel® Xeon® Scalable processors (Cascade Lake/Skylake)‡
  2. 16 DIMMs; up to 4TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM††
  3. 3 PCI-E 3.0 x16,
    4 PCI-E 3.0 x8 (slot 2 & 3 occupied by controller and JBOD expansion port)
  4. 24 Hot-swap 3.5" SAS3/SATA3 drive bays;
    2 hot-swap 2.5" SATA3 drive bays (rear),
    2 M.2 NVMe,
    Expander based backplane
  5. Broadcom 3108 SAS3 AOC
  6. 2x 10GBase-T LAN ports with Intel X722 + PHY Intel X557
  7. Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
  8. 3 Hot-swap 8cm redundant PWM cooling fans,
    2 hot-swap 8cm rear exhaust PWM fans PWM fans
  9. 1200W Redundant Power Supplies Titanium Level (96%)

Digital Power 80 PLUS

Product SKUs
SSG-6049P-E1CR24H
  • SuperStorage 6049P-E1CR24H (Black)
 
Motherboard


Super X11DPH-T
 
Processor/Cache
CPU
  • Dual Socket P (LGA 3647)
  • 2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),

    3 UPI up to 10.4GT/s
  • Support CPU TDP 70-205W
Cores
  • Up to 28 Cores
Note BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
 
System Memory
Memory Capacity
  • 16 DIMM slots
  • Up to 4TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
  • Supports Intel® Optane™ DCPMM††
Memory Type
  • 2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro

†† Cascade Lake only. Contact your Supermicro sales rep for more info.
 
On-Board Devices
Chipset
  • Intel® C622 chipset
SAS
  • SAS3 (12Gbps) via Broadcom 3108 AOC; HW RAID
  • RAID 0, 1, 5, 6, 10, 50, 60
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10
Network Controllers
  • Dual 10GBase-T LAN ports with Intel X722 + PHY Intel X557
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics
  • ASPEED AST2500 BMC
 
Input / Output
LAN
  • 2 RJ45 10GBase-T LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 4 USB 3.0 ports (rear)
  • 1 Type A
VGA
  • 1 VGA port
Serial Port / Header
  • 1 Fast UART 16550 port / 1 Header
 
System BIOS
BIOS Type
  • 256Mb AMI UEFI
 
Management
Software
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores, Chipset Voltages, Memory.
  • 4+1 Phase-switching voltage regulator
FAN
  • Fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Chassis
Form Factor
  • 4U Rackmount
Model
 
Dimensions
Width
  • 17.2" (437mm)
Height
  • 7" (178mm)
Depth
  • 26.5" (673mm)
Weight
  • Gross Weight: 92 lbs (41.7 kg)
  • Net Weight: 55 lbs (24.9 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power status LED
  • Hard drive activity LED
  • Network activity LEDs
  • System Information LED
  • Power fail LED
 
Expansion Slots
PCI-Express
  • 3 PCI-E 3.0 x16 slot
  • 4 PCI-E 3.0 x8 slots
  • Slot 2 & 3 occupied by controller and JBOD Expansion Port
 
Drive Bays
Hot-swap
  • 24 Hot-swap 3.5" SAS3/SATA3 drive bays
Optional
  • 2 Optional Onboard NVMe M.2
 
Backplane
SAS3/SATA3 single expander per backplane
 
System Cooling
Fans
  • 3 Hot-swap 8cm redundant PWM cooling fans
  • 2 Hot-swap 8cm rear exhaust PWM fans
  • Redundant cooling
 
Power Supply (76mm Width)
1200W Redundant Power Supplies with PMBus
Total Output Power
  • 1000W/1200W
Dimension

(W x H x L)
  • 76 x 40 x 336 mm
Input
  • 100-127Vac / 15-12A / 50-60Hz
  • 200-240Vac / 8.5-7A / 50-60Hz
  • 200-240Vdc / 8.5-7A (for CCC only)
+12V
  • Max: 83A / Min: 0A (100-127Vac)
  • Max: 100A / Min: 0A (200-240Vac)
  • Max: 100A / Min: 0A (200-240Vdc)
+5Vsb
  • Max: 4A / Min: 0A
Output Type
  • 19 Pairs Gold Finger Connector
Certification Platinum Level Certified95%+ Titanium Level

  [ Test Report ]
 
Operating Environment
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:

       10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature:

       -40°C to 60°C (-40°F to 140°F)
  • Operating Relative Humidity:

       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:

       5% to 95% (non-condensing)


Parts List - (Items Included)
 

Part Number

Qty

Description

Motherboard / Chassis MBD-X11DPH-T

CSE-846BE1C-R1K23B
1

1
Super X11DPH-T Motherboard

4U Chassis
Add-on Card / Module AOC-S3108L-H8IR 1 LSI 3108 based SAS3 RAID, 12Gb, 8 internal ports, 240HDD - RAID 0,1,10,5,6,50,60, Gen3 x8 Standard Low Profile
Add-on Card / Module AOM-SAS3-8I8E 1 8-port Mini SAS HD Int-to-Ext cable adapter w/FH bracket,HF,RoHS/REACH
Backplane BPN-SAS3-846EL1 1 24-port 4U SAS3 12Gbps single-expander backplane, support up to 24x 3.5-inch SAS3/SATA3 HDD/SSD
Cable 1 CBL-0099 1 Power extension cable; one HDD to two HDD and two FDD. 35/25/12cm. 22AWG
Cable 2 CBL-0296L 3 4 pin to 4 pin fan extension cord, for PWM fan. 23cm. 24AWG
Cable 3 CBL-PWEX-0645 2 big 4 pin male to big 4 pin female, power extension 15cm, 20AWG,RoHS/REACH
Cable 4 CBL-SAST-0531-01 4 MINI SAS HD,12G,INT,80CM,30AWG
Parts MCP-260-00042-0N 1 STD I/O shield for X9 socket R server MB with Gasket.
Heatsink / Retention SNK-P0068PS 2 2U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism
* Power Supply PWS-1K23A-1R 2 AC-DC 1200W, Titanium Level, Redundancy, 1U, PMBUS 1.2, +12V/+5Vsb, 360x76x40 mm,HF,RoHS/REACH
* Power Distributor PDB-PT846-2824 1 PDB with 23pairs input connector support SC846B
* Cable 5 CBL-0071L 1 CBL,FRONT CNTL,16 TO 16 PIN,RA,RND TUBE,75CM,28AWG
* Cable 6 CBL-0160L 2 NEMA5-15P to C13 US power cord 16AWG 6ft, PBF (default for high watt)
* Cable 7 CBL-0217L 1 CBL,CNTL PANEL CONVERTER,FOR SC826/846,FFC,16PIN,22CM
* FAN 1 FAN-0125L4 2 80x32 mm 6.7K RPM SC836 Rear Exhaust Fan w/ Housing
* FAN 2 FAN-0185L4 3 80x80x38 mm, 10.5K RPM, Hot-swappable Middle Cooling Fan for X11 Generation SC846B Chassis
* Drive Tray(s) MCP-220-00075-0B 24 Black gen 5.5 hot-swap 3.5"; HDD tray
* Rear Window MCP-240-84602-0N 1 846B rear window which support 2 X 2.5"; HDD module and DVD
* Front Panel MCP-280-82601-0N 1 Front control board adapter (TB826) for SC216,826,936,846
* Rail Set MCP-290-00057-0N 1 set Rail set, quick/quick, default for 4U 17.2"; W
* Power Supply MCP-290-84604-0N 1 SC846 PDB Cover
* Air Shroud MCP-310-49003-0N 1 SC846 Intel DP X9, X8 PC air shroud 1368x13/12x13MB
* Rail Set MCP-410-00007-0N 1 Rail screw bag
Notes:
  1. Parts with * are inside the chassis
  2. Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.




Optional Parts List
  Part Number Qty Description
3108 Cache Protection BTR-TFM8G-LSICVM02

BKT-BBU-BRACKET-05
1

1
SuperCap for SAS3108 controller

Mounting for SuperCap
Global Services & Support OS4HR3/2/1

OSNBD3/2/1
-

-
3/2/1-year onsite 24x7x4 service

3/2/1-year onsite NBD service
Software SFT-OOB-LIC 1 OOB Management Package (per node license)
Software SFT-DCMS-Single 1 DataCenter Management Package (per node license)