|
|
|
|
Part Number
|
Qty
|
Description
|
Motherboard / Chassis |
MBD-X11DSC+
CSE-946LTS-R1K66P |
1 1 |
Super X11DSC+ Motherboard
4U Chassis |
Rear Window |
MCP-240-94601-0N |
- |
SC946S rear window w/ 3x LP slots for X10DSC+ |
Rear Window |
MCP-290-00132-0N |
- |
SIOM dummy cover for 226S/826S/946S |
Add-on Card / Module
|
AOM-S3616-L-X11DSC-P |
1 |
16-port SAS PCI x16 Controller (Mezzanine),HF,RoHS |
Backplane
|
BPN-SAS3-826TQ-B2B |
1 |
2-port 2U SAS3 12Gbps backplane, support up to 2x 2.5-inch SAS3/SATA3 HDD/SSD |
Backplane
|
BPN-SAS3-946LEL1 |
1 |
45-port 4U SC946L Top-load SAS3 12Gbps expander backplane, support up to 45x 3.5-inch SAS3/SATA3 HDD/SSD |
Cable 1
|
CBL-0481L |
2 |
SATA,INT,ROUND,ST-ST,81CM,30AWG |
Cable 2
|
CBL-CDAT-0728 |
1 |
4 Pin to 4 Pin I2C cable, 65cm, 26AWG, 4 wires, pinout 1-1, for vpp header(jnvi2c1),RoHS/REACH |
Cable 3
|
CBL-PWCD-0578 |
2 |
PWCD,US,IEC60320 C14 TO C13,3FT,14AWG |
Cable 4
|
CBL-PWEX-0863 |
1 |
Powerlug to 5.7 Radsok, yel 12AWG, 32cm for SC946S |
Cable 5
|
CBL-PWEX-1024 |
1 |
Powerlug to 5.7 Radsok, black 12AWG, 45cm,RoHS |
Cable 6
|
CBL-SAST-1029 |
2 |
SLIMLINE SAS to MiniSAS HD,INT,20CM,34AWG |
Cable 7
|
CBL-SAST-1030 |
2 |
SLIMLINE SAS to MiniSAS HD,INT,60CM,32AWG |
Front Panel
|
MCP-210-94602-0B |
1 |
3.5"; LCD display kit for SC946S |
Heatsink / Retention
|
SNK-P0068PS |
2 |
2U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
*
Power Supply
|
PWS-1K66P-1R |
2 |
1U 1600W Redundant Platinum Power Supply 73.5mm width,RoHS/REACH,PBF |
*
Power Distributor
|
PDB-PT946S-824 |
1 |
standard 24pin output |
*
Cable 8
|
CBL-0087 |
1 |
CBL,FRONT CNTL,16 TO 16 PIN,Ribbon,50CM |
*
Cable 9
|
CBL-0160L |
2 |
NEMA5-15P to C13 US power cord 16AWG 6ft, PBF (default for high watt) |
*
Cable 10
|
CBL-0303L |
1 |
4 pin to 4 pin power cable, S-RA, 40CM. 20AWG |
*
Cable 11
|
CBL-0459L |
2 |
LATCH CLAMP,AC POWER CORD |
*
Cable 12
|
CBL-0481L |
2 |
SATA,INT,ROUND,ST-ST,81CM,30AWG |
*
Cable 13
|
CBL-CDAT-0841 |
1 |
8 pin to 8 pin round SGPIO cable, 81cm, 28AWG, pinout 1-1 |
*
FAN 1
|
FAN-0184L4 |
5 |
80x80x38 mm, 14.4K RPM, Rear Exhaust Fan for SC946S Chassis (60-bay) |
*
Front Panel
|
FPB-FP829H |
1 |
Front Control Board for SC829H chassis |
*
Drive Tray(s)
|
MCP-220-00117-0B |
2 |
Black gen-3 hot-swap tool-less 2.5- inch HDD tray |
*
Drive Tray(s)
|
MCP-220-94601-0N |
45 |
SC946ED 3.5\" / 2.5\" tool-less HDD tray |
*
Rail Set
|
MCP-290-00150-0N |
1 |
Rail set, Auto-latch, quick/quick, default 4U 17.2 |
Notes: - Parts with * are inside the chassis
- Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
|