Home제품정보 Super Server New!Tower/4UDP XeonE5-2600V3

SSG-6048R-E1CR72L

견적상담제품문의

Integrated Board

X10DRH-iT

Available Colors :

Key Features
  1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
  2. Up to 1TB ECC DDR4 2133MHz; 16x DIMM slots
  3. 1x PCI-E 3.0 x16, 6x PCI-E 3.0 x8 (3 slots occupied by IT Mode disk controllers, LSI 3008)
  4. Dual 10GBase-T LAN w/ Intel® X540
  5. 72x 3.5" Hot-swap SAS3/SATA3 drive bays; 2x 2.5" Hot-swap drive bays (rear)
  6. SAS3 via 3x LSI 3008 controller; IT mode
  7. Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
  8. 7x 80mm middle cooling fans
  9. 2000W High efficiency (96%) Redundant PSU; Titanium Level

80 PLUS

Product SKUs
SSG-6048R-E1CR72L
  • SuperServer 6048R-E1CR72L (Black)
 
Motherboard

Super X10DRH-iT
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 
System Memory
Memory Capacity
  • 16x 288-pin DDR4 DIMM slots
  • Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
 
On-Board Devices
Chipset
  • Intel® C612 chipset
SAS
  • SAS3 (12Gbps) via 3x LSI 3008 (AOC)
  • IT mode firmware
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® X540 Dual Port 10GbE
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • ASPEED AST2400 BMC
 
Input / Output
Serial ATA
  • 6x SATA3 (6Gbps) ports
LAN
  • 2x RJ45 10GBase-T LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 3.0 ports (rear)
  • 2x USB 2.0 ports (rear)
  • 1x Type A
VGA
  • 1x VGA port
Serial Port / Header
  • 1x Fast UART 16550 port / 1 Header
Chassis
Form Factor
  • 4U Rackmount
Model
  • CSE-847DTS-R2K04LPB
 
Dimensions and Weight
Width
  • 17.2" (437mm)
Height
  • 7" (178mm)
Depth
  • 35" (889mm)
Weight
  • Gross Weight: 67 lbs (30.4 kg)
  • Net Weight: 104 lbs (47.2 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power status LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Power fail LED
 
Expansion Slots
PCI-Express
  • 1 PCI-E 3.0 x16, 3 PCI-E 3.0 x8 slots
  • 3 slots occupied by IT Mode disk controller, LSI 3008
 
Drive Bays
Hot-swap
  • 72x 3.5" Hot-swap SAS3/SATA3 drive bays with SES2
  • Double-sided storage
  • 2x 2.5" Hot-swap drive bays (rear)
Fixed
  • 2x 2.5" Fixed bays
 
Backplane
SAS3/SATA3 single expander per backplane
 
System Cooling
Fans
  • 7x 92mm hot-swap cooling fans
 
Power Supply with Digital Switching Control
2000W Titanium Level (96%) High-efficiency Redundant Power Supplies
Total Output Power
  • 1000W/1800W/1980W/2000W
AC Input
  • 100-127 V, 50-60 Hz
  • 200-220 V, 50-60 Hz
  • 220-230 V, 50-60 Hz
  • 230-240 V, 50-60 Hz
+12V
  • Max: 83.3A & Min: 0A (100Vac-127Vac)
  • Max: 150A & Min: 0A (200Vac-220Vac)
  • Max: 165A & Min: 0A (220Vac-230Vac)
  • Max: 166.7A & Min: 0A (230Vac-240Vac)
5V SB
  • Max: 1A / Min: 0A
Certification Titanium Level96%    Titanium Level
   
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
Parts List - (Items Included)
 
 Part Number
 Qty
 Description
Motherboard / Chassis MBD-X10DRH-iT
CSE-847DTS-R2K04LPB 		1
1		 Super X10DRH-iT Motherboard
4U Chassis
Add-on Card / Module AOC-S3008L-L8E-P 3
Backplane BPN-SAS3-847DF 1 Front mid-plane (847DF) for SAS3 12Gbps 847D project, support 48x 3.5" SATA3/SAS2/SAS3 HDDs by using 24x dual-HDD tray,,RoHS/REACH
Backplane BPN-SAS3-847DE48D 1 SAS3 12Gbps front expander board for SC847D, support 48x SAS/SATA HDD, support direct connection (no cascade) type configurations,RoHS/REACH
Backplane BPN-SAS3-847DR 1 Rear mid-plane (847DR) for SAS3 12Gbps 847D server project, support 24x 3.5
Backplane BPN-SAS3-847DE24D 1 SAS3 12Gbps rear expander board for SC847D, support 24x SAS/SATA HDD, support direct connection (no cascade) type configurations,RoHS/REACH
Cable 1 CBL-SAST-0531 4 Internal Mini-SAS HD to Mini-SAS HD 80cm,30AWG,12Gb/s, HF,RoHS/REACH,PBF
Cable 2 CBL-SAST-0532 2 Internal Mini-SAS HD to Mini-SAS HD 50cm,30AWG,12Gb/s,HF,RoHS/REACH,PBF
Label LBL-0108 1 CAUTION LABEL FOR REDUNDANT PWR SYSTEMS
Parts MCP-260-00042-0N 1 STD I/O shield for X9 socket R server MB with Gasket.
Heatsink / Retention SNK-P0048PS 1 2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MB
Heatsink / Retention SNK-P0048AP4 1 2U Active CPU Heat Sink for Intel R2/R3/B2/B3 and AMD C32
Optional Parts List
  Part Number Qty Description
Peripheral Drives MCP-220-84704-0N - Rear 2 X 2.5" HDD kit (cables & backplane included)
Onsite Service Program OS4HR3/2/1 - 3/2/1-year onsite 24x7x4 service
Onsite Service Program OSNBD3/2/1 - 3/2/1-year onsite NBD service
Software SFT-OOB-LIC 1 OOB Management Package (per node license)
Software SFT-DCMS-Single 1 DataCenter Management Package (per node license)