Home제품정보 Super Server New!Tower/4UDP XeonFatTwin E5-2600V3

SYS-F628R2-FC0

견적상담제품문의

Integrated Board

No Infomation

Available Colors : Black

Key Features
  1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
  2. Up to 512GB ECC DDR4 2133MHz; 8x DIMM sockets
  3. 1x PCI-E 3.0 x16 (LP) slot
  4. Front I/O ports: 2 GbE LAN, 2 USB 3.0, and 1 VGA connector
  5. Built-in Server management tool (IPMI 2.0, KVM/media over LAN) with dedicated LAN port
  6. 8x 2.5" Hot-swap SAS/SATA HDD Bays; SAS3 (12Gbps) via LSI 3008
  7. 1280W Redundant Power Supplies Platinum Level (95%)

80 PLUS

Product SKUs
SYS-F628R2-FC0
  • SuperServer F628R2-FC0 (Black)
Motherboard
Super X10DRFF-C
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP **)
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache
Note
  • ** Please contact your Supermicro sales representative for additional details.
System Memory
Memory Capacity
  • 8x 288-pin DDR4 DIMM slots
  • Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • RDIMM: 32GB, 16GB, 8GB, 4GB
  • LRDIMM: 64GB, 32GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel® C612 Express chipset
SAS
  • SAS3 (12Gbps) via LSI 3008
  • SW RAID 0, 1, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Controllers
  • Intel® i210 Single Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
Input / Output (per node)
SAS
  • 8x SAS3 (12Gbps) ports
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 3.0 ports
VGA
  • 1x VGA port
Serial Port / Header
  • 1x Fast UART 16550 port
Chassis
Form Factor
  • 4U Rackmount
Model
  • CSE-F424BD-R1K28B
Dimensions and Weight
Width
  • 17.63" (448mm)
Height
  • 6.96" (177mm)
Depth
  • 29" (737mm)
Depth
  • 28.3" (W) x 15.0" (H) x 42.4" (D)
Weight
  • Net Weight: 105 lbs (47.63 kg)
  • Gross Weight: 150 lbs (68.04 kg)
Available Colors
  • Black
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power status LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Power fail LED
Expansion Slots (per node)
PCI-Express
  • 1 PCI-E 3.0 x16 (LP) via riser card
Drive Bays (per node)
Hot-swap
  • 8x 2.5" Hot-swap SAS/SATA HDD trays
Fixed (optional)
  • 2x 3.5" Fixed SATA HDD trays
System Cooling (per node)
Fans
  • 8x 8cm 11K RPM Rear fans with air shroud and PWM fan speed control
Power Supply
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input
  • 1000W Output @ 100-140V, 8-12A, 50-60Hz
  • 1280W Output @ 200-240V, 6-8A, 50-60Hz
DC Output
  • 1000W: +12V/83A; +5Vsb/4A
  • 1280W: +12V/106.7A, +5Vsb/4A
Certification Platinum Level Certified 95%+
  Platinum Certified   [ Test Report ]
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 5°C to 40°C (41°F to 104°F)
  • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5% to 95% (non-condensing)