|
| SYS-4027GR-TR |
- SuperServer 4027GR-TR (Black)
|
| |
| CPU |
- Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 150W TDP **)
- Dual Socket R (LGA 2011)
|
| Cache |
|
| System Bus |
|
| Note |
- † BIOS version 3.0 or above is required
|
| Note |
- ** Motherboard supports this maximum TDP. Please verify your system can thermally support
|
| GPU/Xeon Phi Support |
- K80, up to 150W CPU at 30°C
- K40 (Atlas), up to 150W CPU at 30°C
- K10/K20/K20X/K1/K2 (Kepler), up to 150W CPU at 30°C
- Xeon Phi, up to 150W CPU at 30°C
|
| |
| Memory Capacity |
- 24x 240-pin DDR3 DIMM slots
- Up to 1.5TB DDR3 ECC LRDIMM
- Up to 768GB DDR3 ECC RDIMM
- Up to 192GB DDR3 ECC/non-ECC UDIMM
|
| Memory Type |
- 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- Support ECC and non-ECC UDIMMs
|
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
| Chipset |
|
| AHCI SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1
|
| SCU SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® i350 Dual port GbE LAN
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10Base-T , 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
- Matrox G200 (Nuvoton WPCM450 BMC)
|
| Super I/O |
|
| |
| AHCI SATA |
- 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
|
| SCU SATA |
- 4x SATA 2.0 ports (3Gbps)
|
| LAN |
- 2x RJ45 10GBase-T ports
- 1x dedicated LAN port for IPMI
|
| USB |
- 9x USB 2.0 ports total (4x rear + 4x via header + 1x Type A)
|
| Serial Port / Header |
- 1x Fast UART 16550 ports: 1 header
|
| |
| BIOS Type |
- 16MB SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
|
|
| Form Factor |
- 4U Rackmount
- Rackmount Kit (MCP-290-00057-0N)
|
| Model |
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Weight |
- Net Weight: 80 lbs (36.2 kg)
- Gross Weight: 135 lbs (61.2 kg)
|
| Available Colors |
|
| |
|
| PCI-Express |
- 8x PCI-E 3.0 x16 (double-width) slots
- 2x PCI-E 3.0 x8 (in x16) slot
- 1x PCI-E 2.0 x4 (in x16) slot
|
| |
|
| Fans |
- 8x 92mm RPM Hot-Swappable Cooling Fans
|
| Shrouds |
- 1x Air Shroud (MCP-310-84806-0B)
- 1x Air Shroud (MCP-310-84807-0B)
|
| |
|
| 1000W/1600W 1U Redundant Power Supply |
| AC Input |
- 1000W @ 100-127V, 12.9A Max., 50-60Hz
- 1600W @ 200-240V, 9.5A Max., 50-60Hz
|
| DC Output |
- 1000W: +12V/82A; +12Vsb/2A
- 1600W: +12V/132A; +12Vsb/2A
|
| Certification |
Platinum Certified
[Cert. in progress]
|
| |
|
| CPU |
- Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V)
Standby, VBAT, Memory, Chipset Voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
|
| FAN |
- 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
|
| Temperature |
- Monitoring for CPU and system environment
- Thermal Control for 8x fan connectors
|
| Other Features |
- Chassis intrusion detection
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature: 10°C to 35°C (50°F to 95°F)
- Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5% to 95% (non-condensing)
|
|
